| From | Message |
99Dak5.2L4x4
Dodge Dakota
JOIN HERE
6/12/2002
18:26:10
|
 Subject: 3:92 or 4:10 with 33x12.5x15
IP: Logged
Message:
I have the stock 3:55s in my 99 Dak. For those of you for have switched over and are running the bigger tires 33x12.5x15 or 33x12.5x16; are you happy with 3:92s or do you think 4:10s would be better? I do 95% city driving and I'm planning on putting in new gears to accomodate that tire. I know I don't have too switch but even with my 32x11.5x15 I noticed the sluggish power right away and it'll get worse with 33s.
Any opinions?
|
Knobbyman
*GenIII*
6/13/2002
10:40:53
|  RE: 3:92 or 4:10 with 33x12.5x15
IP: Logged
Message:
If your going to do the switch I would personally go to 4.10's.
Right now I'm running. 33's with the stock 4.7 and 3.55 gears. I wish I could run 4.10's.
'01 Graphite QC 4x4
4.7 3.55 LSD
4.5" Customized Suspension Lift
305x70x16 GoodYear MT/R's
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
Knobbyman
*GenIII*
6/13/2002
10:52:03
| RE: 3:92 or 4:10 with 33x12.5x15
IP: Logged
Message:
If your going to do the switch I would personally go to 4.10's.
Right now I'm running. 33's with the stock 4.7 and 3.55 gears. I wish I could run 4.10's.
'01 Graphite QC 4x4
4.7 3.55 LSD
4.5" Customized Suspension Lift
305x70x16 GoodYear MT/R's
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
stealwings
Dodge Dakota
JOIN HERE
6/13/2002
16:26:57
| RE: 3:92 or 4:10 with 33x12.5x15
IP: Logged
Message:
I have a 98 dak with a 3.55 8 1/4 rear end. The smallest gear I could find was a 3.92 gear. If you can find a smaller gear I sure would like to know where you found it. I would love to have a 4.10 gear for my 33's. Greg
|
BDAKCC01
Dodge Dakota
JOIN HERE
9/12/2002
15:02:42
| RE: 3:92 or 4:10 with 33x12.5x15
IP: Logged
Message:
I was just wondering if any of you have a Standard tranny. I have 4.7L with a 5-speed 4X4 with 3:92. I'm thinking of going up to 33X12.5X15. What do you think?
|
FortWorth4x4
GenIII
9/12/2002
16:50:15
| RE: 3:92 or 4:10 with 33x12.5x15
IP: Logged
Message:
StealWings: There are a number of places that have gears as low as 4.56 for 97-99 Dakotas. I know Randys Ring and Pinion carries them for a good price. Not sure what the others charge for them.
'99 White CC SLT 5.2L V8 4x4 Auto 9" Lift 35x12.5x15 ProComp Xterrains....plus more.
|
Dan Gruber
GenIII
9/13/2002
10:13:54
| RE: 3:92 or 4:10 with 33x12.5x15
IP: Logged
Message:
I agree with Knobby. If you can, go with the 4.10's.
I did the math on all this before I did a gear swap several months ago...unfortunately 4.10's aren't available for the front end of 2000+ Daks so I had to go with 3.92's. Anyway, 33's with 3.92's give roughly the same overall gearing as 31's with 3.55's. So if you're going to spend the money, go with 4.10's. to get it a little lower than stock. In my opinion my stock 3.55's with 31's were on the verge of being too tall, only made worse when I switched to 32's.
Dan
2000 CC SLT 4.7 4X4 Auto 3.92 LSD
3 inch Performance Accesories lift & 32 inch BFG MT KM's
|
UWGriz
Dodge Dakota
JOIN HERE
9/13/2002
11:33:25
| RE: 3:92 or 4:10 with 33x12.5x15
IP: Logged
Message:
I'm running 33x12.50x15s and 4.10s. I'm happy and wouldn't want anything less if you would want to ever tow anything.
Stealwings, I have the same axle you do and I got my 4.10s from Reider Racing. Randy's Ring and Pinion also had them and they both could get 4.56s for me.
|
dweishaar
GenIII
9/13/2002
14:32:19
|  RE: 3:92 or 4:10 with 33x12.5x15
IP: Logged
Message:
i have 3.92 gearing and am running 33x1250's with a 5 speed. 1-4 are fine, but my 5th is very lacking at lower 2000-2500 rpm, i'm gonna go with 4.10 when i get the money.
One Eyed Fox
The Baja Dak
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
