From | Message |
JPekar GenIII
5/07/2002 14:52:39
|
Subject: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: Whats up with these numbers if i look under the front of my truck and look at the diff it says C205... and my Dodge Dealer printed out a page from the factory showing everything my truck has and it has listed Chrysler 205MM not an 8in. I want to know what is up with anyone elses truck what does it say. I called Randy's ring & pinion and they said it is a 8In but just some help me.
By the way mine is a 2001 but built in late 2000
4.7L 5Spd 3.55 LSD, Z-Tube with 9 Pro Flow Filter Flowmaster W/Duals, 72mm Throttle Body, 3" Body Lift W/33" BF Goodrich All Terain's
|
Knobbyman *GenIII*
5/07/2002 16:22:57
| RE: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: I have the same stamped on my front diff.. Chrystler 205MM .. I can never remember it unless someone says that though.
I think it's the same just two differen't ways of saying the same thing.
'01 Graphite QC 4x4 4.7 3.55 LSD http://www.knobbyman.com ----Speed only breaks stuff faster----
|
JPekar GenIII
5/07/2002 19:36:37
| RE: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: Im just trying to figure out exactially what we have under the front. I called Randy's ring & pinion and they called it a 8 inch so i really dont care what they call it i just hope they start to design some new gears for this front diff these 3.55 are killing me i need at least 4.10 preffer 4.56. Also anyone know whats under the new ram i heard the 1500 has the same front diff. And the ram always gets new toys faster than us.
4.7L 5Spd 3.55 LSD, Z-Tube with 9 Pro Flow Filter Flowmaster W/Duals, 72mm Throttle Body, 3" Body Lift W/33" BF Goodrich All Terain's
|
Dan Gruber GenIII
5/07/2002 19:54:37
| RE: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: JPekar,
8 inches = 205mm. Same front end. I ordered the 3.92's from Randy's Ring & Pinion last week and just had them installed today. Good swap! I just made a laundry list of comments on a post on the off-road forum. Take a look at those and if you have questions, feel free to ask.
Say it with Krylon! Dan 2000 CC SLT 4.7 4X4 Auto 3.92 LSD 3 inch Performance Accesories lift & 32 inch BFG MT KM's
|
4wDakota GenIII
5/08/2002 11:59:41
| RE: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: JPekar, do you have any pics of your truck with the lift and tires?
If so post them or email them to me.
Corey
98 CC 4x4, 5.2 Auto 3.55LSD
|
JPekar GenIII
5/08/2002 16:22:51
| RE: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: I dont have any new pics yet waiting to get the digital camera Working on my computer. However i will post when on should be about a week or so.
And I know I can get the 3.92 but that seems like a waste to me because you can get those direct from Chrysler. I want something for more power. I do a lot of towing and adventually want to go up to 35" tires so a 4.56 ratio is really what im looking for. Anyway anyone know whats under the new 1500 ram???
4.7L 5Spd 3.55 LSD, Z-Tube with 9 Pro Flow Filter Flowmaster W/Duals, 72mm Throttle Body, 3" Body Lift W/33" BF Goodrich All Terain's
|
david ledger Dodge Dakota JOIN HERE
7/17/2005 01:28:54
| RE: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: i have an 02 4wd with the C205 mm front axle. I have been looking for a locker for this axle but nobody makes one. I heard that the 2003 1500 has the same front axle and that a locker for that axle would work in the dakota. makes sense, but does anyone have a 2003 (or newer) 1500 with a C205 mm front axle ?, or know if the 2003 1500's use this axle ? thanks.
|
david ledger Dodge Dakota JOIN HERE
7/17/2005 01:29:57
| RE: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: i have an 02 4wd with the C205 mm front axle. I have been looking for a locker for this axle but nobody makes one. I heard that the 2003 1500 has the same front axle and that a locker for that axle would work in the dakota. makes sense, but does anyone have a 2003 (or newer) 1500 with a C205 mm front axle ?, or know if the 2003 1500's use this axle ? thanks.
|
Purplemonster GenIII
7/18/2005 21:22:04
| RE: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: Off Topic I know, but why did Dan Gruber swap in 3.92's? I got em in my v6 and I hate the bastards. I gotta get 4.56's soon. I was looking up parts on drivetrainsuperstores.com and it has the dakota front axle listed as a dana 35 ifs. Mine's a 98, maybe yours are newer?
How deep can that pond possibly be?
|
david ledger Dodge Dakota JOIN HERE
7/18/2005 21:40:08
| RE: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: I'll check that drivetrain website and see what it says about the front axle for the 02. why the hell they put in a metric size (205mm) is beyond me. 205mm is something like 8.07 inches, which doesnt equal sh-t when you are talking about tolerances measured in thousandths of an inch.
I sure would like to lock the front and have that fourth wheel digging- all our trails on Guam are clay, which is great if its dry but like trying to ice skate if its wet. a little wet is good, keeps the dust down and can still grip, but really wet is damn near impossible- you have to steer by dropping into the ruts and just let it go. even the jeeps with tractor tires slip-slide all over the place.
|
Walt_Felix Dodge Dakota JOIN HERE
7/19/2005 08:33:59
| RE: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: Front Axle
87-96 = Chrysler 7 ¼”
97-99 = Dana 35
2000+ = 205mm
|
chris4x4 Dodge Dakota JOIN HERE
7/19/2005 19:03:26
| RE: Chrysler 8inch or Chrysler 205MM IP: Logged
Message: I just had the 4:10's installed and its the best mod I have done!!! Check out 4wheel parts for the gears. I had to wait a few weeks for the gears to come in, but it was worth it
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|