| From | Message |
sumdude
Dodge Dakota
JOIN HERE
1/28/2012
10:17:45
|
 Subject: spindle lift
IP: Logged
Message:
anyone out there running a spindle lift on their 2wd 3rd gen dakota? i know no company makes them but im sure there are some custom spindles that have been made since it is totally possible. if anyone knows post back i would love to get more insight on this
|
95
Dodge Dakota
JOIN HERE
2/15/2012
13:12:00
| RE: spindle lift
IP: Logged
Message:
I also need some help finding lift spindles for my 95 dodge dakota. Its 2 wheel drive and i cant find anything for the 2 wheel drives. anybody know?
|
20004.7L2WD
Dodge Dakota
JOIN HERE
2/15/2012
14:17:57
| RE: spindle lift
IP: Logged
Message:
Anybody know where I can get one? I have a local shop telling me I can get a 3" installed for $1800 but I would prefer to do the work myself.. Its a weekend driver so I have the time.. Please let me know if you can help! I'm very interested!
|
lifteddakota
Dodge Dakota
JOIN HERE
2/24/2012
16:36:54
| RE: spindle lift
IP: Logged
Message:
good luck trying to find a spindle lift for you dakota guys the cheapest way to do this is to get
3 inch lift spindles for a ram truck and install them to your dakota but this is not as easy as it sounds you need to do a lot of modifications what i did was swapped over to ram brake calipers, rotors, and wheel hubs and ran heavy duty ball joints (dakota ones will bolt up to the ram spindles) i also had to swap out the rear axle shafts for ram axles due to the different lug pattern. im running that setup with the fabtech 3 inch coil and aarm lift and man my truck looks sick as f*ck im running 35 inch tires on 17 inch rims with 3.75" backspacing. it can be done you just need those extra parts from a donor ram truck similar model year any good junkyard will do.
|
markmdz
Dodge Dakota
JOIN HERE
4/24/2012
11:58:15
| RE: spindle lift
IP: Logged
Message:
to lifteddakota --> tell me more about your
spindle swap from a ram. I'm very interested in
this swap.
Because the rams are solid front axle, and the
Dak's are IFS, what exactly did you swap over?
Does the spline in the front hub match the stock
dakota axles?
What year is your Dakota? What year Ram did you
poach from? Any pictures of the setup? Very
interested in knowing more...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
