| From | Message |
4x4 kota
Dodge Dakota
JOIN HERE
1/04/2009
17:32:28
|
 Subject: torsion bars
IP: Logged
Message:
i have a 99 dakota 4x4 if i use my torsion bars to raise my front up how much will it lift it and do i have to get an alinement. what about air shocks on front will that mess up my alinement
|
onearmsteve
Dodge Dakota
JOIN HERE
1/04/2009
21:23:51
| RE: torsion bars
IP: Logged
Message:
torsion lift well go about 2 inches or until you hit the ruber stopers and yes you will have 2 get it alinement and air shocks will mess with it
|
4x4 kota
Dodge Dakota
JOIN HERE
1/05/2009
09:46:35
|  RE: torsion bars
IP: Logged
Message:
thank you but what rubber stops are you talking about and where are they
|
onearmsteve
Dodge Dakota
JOIN HERE
1/05/2009
19:38:12
| RE: torsion bars
IP: Logged
Message:
the rubber stops are under the upper A-arms you have two sets on each side so you dont extend the suspension to far ether way
|
101
Dodge Dakota
JOIN HERE
1/07/2009
20:20:02
| RE: torsion bars
IP: Logged
Message:
"what rubber stops are you talking about and where are they"
C'mon, junior. Where's the bump stops??!! Geez.
If you're gonna be modifying yout Dakota, you need to spend some quality time with it. Get under the thing and just look at it. Study it. See how things are connected. Learn how things fit together and how they come apart. Figure out what parts get closer together when the suspension is extended, and what parts get closer together when the suspension is compressed. Then when you drive it, you can picture in your mind what's happening with the mechanicals.
|
Bucket
GenII
1/07/2009
20:53:33
| RE: torsion bars
IP: Logged
Message:
101, you start off a bit harsh, we all gotta start somewhere but your main point and how to go about it is brilliant advice for someone new to their vehicle.Great point 101.
|
calikota
Dodge Dakota
JOIN HERE
1/08/2009
09:04:23
| RE: torsion bars
IP: Logged
Message:
I concur with bucket.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
