| From | Message |
Dennis01Quad
Dodge Dakota
JOIN HERE
11/15/2008
11:56:33
|
 Subject: Cranking torsion bars on 3" rancho lift?
IP: Logged
Message:
Hello, I have a 01 dakota. its a quad cab with the v8 and i have the 3" body lift & the 3" rancho suspension lift. I was wondering if you can crank the bars up on the lift to get two more inches out of it and possibly add shackles/leafs to the rear?? has anyone done this? is it possible?
|
Catfish Craig
Dodge Dakota
JOIN HERE
11/16/2008
19:03:30
| RE: Cranking torsion bars on 3" rancho lift?
IP: Logged
Message:
I have 3in BL and Rancho also. I changed thew 2 inch block to a 3 inch block in the rear and cranked the TB another 1 1/2 inch to level it out. Any higher and I don't think you will like the ride. When I first installed it, I cranked the TBs up and the ride gets stiff. Mine is a daily driver so Im happy where it is now.
Good Luck CC
|
Dennis01Quad
Dodge Dakota
JOIN HERE
11/16/2008
20:12:17
| RE: Cranking torsion bars on 3" rancho lift?
IP: Logged
Message:
Okay so it is possible! thanks. 3" blocks in the rear work well to level it all out? any pictures of your rig? Are you also running 35's??
|
Catfish Craig
Dodge Dakota
JOIN HERE
11/26/2008
22:53:41
| RE: Cranking torsion bars on 3" rancho lift?
IP: Logged
Message:
3 inch blocks work great, they are angled btw. I don't have a photo site but have posted on a dak/rango sites that allow it. Im running a 315/75/16.
Good Luck CC
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
