| From | Message |
2THEXTRM
GenIII
 
4/19/2002
15:22:45
|
 Subject: Flush Mount Tonneau/Mopar Light Bar
IP: Logged
Message:
Anyone know if the Checkerpro Flushmount Hard Tonneau will work with the Mopar Bedrail/Light Bar Combo? I have been able to verify how the Mopar set-up mounts to the top of box, if it clamps on(that would be bad to add any flush mount tonneau), or if it bolts to top of bed rails. I don't like drilling holes in my dak, but I would make an exception in this case and use plenty of silicone to seal the hole when putting bolts through. I just ordered the checkerpro tonneau and the Mopar bedrail/light bar and then thought, sh!t, they might not work together. If not my wifes Dak will get one or the other and I will sell my soft tonneau. HELP!!!
Flowmaster cat back, Air Raid CAD and homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5 Block Lift, 33x11.50-16's
|
2THEXTRM
GenIII
4/24/2002
14:15:46
| RE: Flush Mount Tonneau/Mopar Light Bar
IP: Logged
Message:
Anyone have a Mopar Bedrail/Lightbar Combo or seen how they mount to truck bed? Both the dealer and MOPAR Parts Line can't really tell me. I haven't got either part yet, but this question is killing me in the meantime. Thanks!
Flowmaster cat back, Air Raid CAD and homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5 Block Lift, 33x11.50-16's
|
cadetdak
Dodge Dakota
JOIN HERE
4/27/2002
15:57:26
| RE: Flush Mount Tonneau/Mopar Light Bar
IP: Logged
Message:
I've got a mopar light bar and I can tell you the bar bolts to the top of the rails you have to put 2 1.5 inch holes on each side so make sure before you put this on that's it's what you really want.
|
2THEXTRM
GenIII
4/28/2002
00:56:15
| RE: Flush Mount Tonneau/Mopar Light Bar
IP: Logged
Message:
So your lightbar only bolts to the top of box rails, that's cool cuz my set-up should work as I hoped. I am installing my flushmount tonneau tomorrow. Did you mount Mopar Lights on the lightbar or aftermarket, if so what kind and shape(round/rectangle) are you using? You wouldn't happen to have any pics of your truck/lightbar that you could email would you?
Thanks!
Flowmaster cat back, Air Raid CAD and homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5 Block Lift, 33x11.50-16's
|
cadetdak
Dodge Dakota
JOIN HERE
4/28/2002
20:57:19
| RE: Flush Mount Tonneau/Mopar Light Bar
IP: Logged
Message:
I used after market KC hilites they worked and look really good lus they arer alot cheaper.
i'll post some pictures as soon as I can but I don't have a digital camera and the truck that they a were on was totaled a few month ago and I haven't had an opportunity to putthem on my new truck yet.
|
2THEXTRM
GenIII
4/29/2002
18:56:46
| RE: Flush Mount Tonneau/Mopar Light Bar
IP: Logged
Message:
Thanks!
Flowmaster cat back, Air Raid CAD and homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5 Block Lift, 33x11.50-16's
|
bbarnes
Dodge Dakota
JOIN HERE
7/21/2002
23:14:56
| RE: Flush Mount Tonneau/Mopar Light Bar
IP: Logged
Message:
Can I get a link to where I can buy a flush mount tonneau cover for a '97 Dakota CC
TIA
|
Dakota Jeff
Dodge Dakota
JOIN HERE
10/28/2004
16:44:15
|  RE: Flush Mount Tonneau/Mopar Light Bar
IP: Logged
Message:
Where can I get this mopar light bar? Do I have to go to the dealer because I would rather not go to the dealer and just order it from somewhere! Thanks JEff
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
