| From | Message |
Ryan
Dodge Dakota
JOIN HERE
1/01/2008
18:50:18
|
 Subject: quick tire question
IP: Logged
Message:
Im finally getting my 3 in. body lift put onto my 2000 dakota 2wd this friday and i need to preorder tires. i really want to get 32in tires on it so the question is that i wanted to know if anyone was 100 percent positive that these will fit fine with no trimming at all?
|
Hector
Dodge Dakota
JOIN HERE
1/02/2008
19:44:36
| RE: quick tire question
IP: Logged
Message:
Depends on the width of the tires you want.
265/75-16 will fit just fine (assuming you have 16-inch rims). That's equal to 32x10.5x16.
If you have 15-inch rims, 32x10.5x15 is same as 265/80-15.
Not all that familiar with the clearances in a 2WD. Mine's 4x4. After you get the lift installed, you will then be able to doublecheck the clearances between present tires and body/frame/suspension components, and calculate the correct larger tire size on those numbers.
Good Luck.
|
rivermaniac
Dodge Dakota
JOIN HERE
1/03/2008
19:30:15
| RE: quick tire question
IP: Logged
Message:
with stock rims will fit , you will need to trim the inner plastic specially in the back .............With aftermarket rims 3.75 backspacing will not fit . 31 will need trimming then .........................
|
Brad
Dodge Dakota
JOIN HERE
1/15/2008
16:49:42
| RE: quick tire question
IP: Logged
Message:
i have a set of 32x11.5x15 BF Goodrich all terians on 15x10 black steel rims with i believe 4.5 backspaceing and i only tightened my torsion bars up to level the truck and i had no problems, i had to trim the front valance a little but no rubbing on frame or control arm at full lock,
they are for sale to i bought a new truck i only got 4 k i paid like a grand for them, id be happy with close to half that. let me know yamaharider0139@yahoo.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
