| From | Message |
timm667
Dodge Dakota
JOIN HERE
7/23/2007
23:38:03
|
 Subject: can i get 35s on my dakota
IP: Logged
Message:
i have a 01 dakota 4x4 ( full time 4wd)
running 265/70/16 on a stock set up
now i have 2in blocks in the rear
and the new tortion bar keys in the front.
am putting 3in body lift on soon.
will i be able to run 35s? i dont mind putting
new wheels if i have to. now what back spacing
will i need?
|
Kota Kid
Dodge Dakota
JOIN HERE
8/12/2007
22:55:50
|  RE: can i get 35s on my dakota
IP: Logged
Message:
Probably not without trimming you fenders.
|
Frank
Dodge Dakota
JOIN HERE
8/22/2007
23:13:55
| RE: can i get 35s on my dakota
IP: Logged
Message:
I just finished putting the new keyways and 2 inch blocks on rear axle with 3 inch body lift, I am running the metric 35, 315 70 16- No problems, a little rub on the frame, however I am about to put spacers in to cut that out, although it only does it at a full turn, the dakota turns sharp. Also, I didnt have to trim anything like I thought I might have to. I can send pics later if you like. I would keep the stock wheels after market wheels will cause major rubbing in the wheel well due to the out off set spacing.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
