| From | Message |
mark davis
Dodge Dakota
JOIN HERE
3/13/2006
11:56:59
|
 Subject: whos truck is this??
IP: Logged
Message:
i did a google search for lifted dakota and found this it came from this site anyone know whos truck it is?? its the white truck at the top
http://images.google.com/imgres?imgurl=http://home.comcast.net/~kc8lbn/wsb/media/34123/site1114.jpg&imgrefurl=http://www.dodgedakota.net/boards/raise/1696.html&h=480&w=640&sz=62&hl=en&start=25&tbnid=IMP8Mxb9ildDeM:&tbnh=101&tbnw=135&prev=/images%3Fq%3Dlifted%2Bdodge%2Bdakota%2B%26start%3D20%26dnum%3D20%26svnum%3D10%26hl%3Den%26lr%3D%26safe%3Dvss%26sa%3DN
|
Dan M
Dodge Dakota
JOIN HERE
3/13/2006
12:55:19
| RE: whos truck is this??
IP: Logged
Message:
a 95 4x4.
http://home.comcast.net/~kc8lbn/wsb/html/view.cgi-home.html-.html
some other pictures and stuff there.
- Dan M
|
mark davis
Dodge Dakota
JOIN HERE
3/13/2006
15:30:51
| RE: whos truck is this??
IP: Logged
Message:
just from looking how much lift do u think it has and how big are the tires
|
Paul
Dodge Dakota
JOIN HERE
3/14/2006
08:19:06
| RE: whos truck is this??
IP: Logged
Message:
The reason it looks so big is because of the Glass fenders, it also does have a 4" trailmaster lift and 3" body, I'm pretty sure they are 33X10.50's
|
other bill
Dodge Dakota
JOIN HERE
3/14/2006
11:40:04
| RE: whos truck is this??
IP: Logged
Message:
That would be my rig. Only now the fenders are painted to match the rest. The pinstripe really emphasizes the fender bulge. A friend described it coming down the road as looking like "a Dakota on steriods". HA
Yes it has the 4" Trailmaster lift, a 2" body lift, and little to no tweek on the torsion bars. I could honestly get another inch-a-half out of the front end. What I need to do is get bigger blocks or an extra spring for the rear 1st. The pre-run bar I made in my garage. Those are 33x10.5 BFG ATs which I am quite happy with. I have about 20K miles on them.
Because it was done in stages over several years, I do not know how much taller it is from stock. A conservative guess would be about 8 inches. (4"susp.+2"body+2"tire diff.) If I remember right, stock rollers were 29" Wranglers? P235s or 245s.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
