| From | Message |
lift
Dodge Dakota
JOIN HERE
3/03/2006
15:20:01
|
 Subject: easy lift
IP: Logged
Message:
what is the easiest and cheapest way to get about a 2 inch lift
|
Adam
Dodge Dakota
JOIN HERE
3/03/2006
15:34:45
| RE: easy lift
IP: Logged
Message:
Body lift...or crank your torsion bars and put some blocks in the back.
|
lift
Dodge Dakota
JOIN HERE
3/03/2006
15:37:45
| RE: easy lift
IP: Logged
Message:
how much would you crank the torsion bars for that
|
Adam
Dodge Dakota
JOIN HERE
3/03/2006
15:38:54
| RE: easy lift
IP: Logged
Message:
I only did like 3.5 turns but they can still go up some.
|
lift
Dodge Dakota
JOIN HERE
3/03/2006
15:41:55
| RE: easy lift
IP: Logged
Message:
i read somewhere about them snapping off without the right amount of turns..is that true?
|
Adam
Dodge Dakota
JOIN HERE
3/03/2006
15:44:32
| RE: easy lift
IP: Logged
Message:
I've never heard of the Torsion Bars snapping off but I guess it could happen I'm not sure. I've had my T-Bars cranked and then I put a bodylift on and I've had no problems at all...I actually like the way it rides a little stiffer now.
|
Kowalski
GenIII
3/03/2006
16:05:48
| RE: easy lift
IP: Logged
Message:
Got close to 2" from mine, no problems.
Lead, follow, or get out of the way
|
Paul
Dodge Dakota
JOIN HERE
3/04/2006
16:40:15
| RE: easy lift
IP: Logged
Message:
2.5 turns on the bolts would be suffiecient...
|
Kowalski
GenIII
3/05/2006
08:46:05
| RE: easy lift
IP: Logged
Message:
Don't worry about the number of turns so much as measuring and raising both sides equally. This can take a differing amount of turns on each side.
Lead, follow, or get out of the way
|
Adam
Dodge Dakota
JOIN HERE
3/05/2006
11:54:02
| RE: easy lift
IP: Logged
Message:
Another thing I didn't think of was you might need an alignment afterwards.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
