Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:47:04 - 12/20/2024

Raised / Lifted Dakotas
FromMessage
BadAssDak
Dodge Dakota
JOIN HERE
 Email

11/17/2005
23:18:51

Subject: T-bar lift
IP: Logged

Message:
i want to do the torsion bar lift but i dont have the money for an alignment. can i pull off an allignment myslef? and if so, how would i do that? haha thanx for the help




Josh
Dodge Dakota
JOIN HERE


11/18/2005
14:21:41

RE: T-bar lift
IP: Logged

Message:
Depends on year.
2005 and up have adjusters, 2004 and before you have to loosen bolts, reposition the control arms, tighten up everything and recheck to see if you got close.
Alignment is best left to alignment specialists, so if something goes wrong with it, you have recourse.



8banger
GenIII
 User Profile


11/18/2005
22:13:13

RE: T-bar lift
IP: Logged

Message:
I did the 2" torsion lift and my camber wasn't bad at all. My tires are wearing evenly still, besides if they do go bad it gives you an excuse to go bigger.

I have had mine cranked for 5,000 miles and no problems at all.

03 Dakota 4X4 QC SportPlus 4.7L 3.55 LSD AWD
Superchipped, 2Chamber Flowmaster Dumped, K&N Drop-in, 2"Torsion Lift

My 4X4's Baptism

Josh
Dodge Dakota
JOIN HERE


11/18/2005
23:13:59

RE: T-bar lift
IP: Logged

Message:
Wow. That was stupid of me.
I just realized if you have 2005 or later, you don't have torsion bars.
Ding dang it!




JimmyD
Dodge Dakota
JOIN HERE


11/18/2005
23:16:43

RE: T-bar lift
IP: Logged

Message:
Unless it's a Durango. Ugh.



Tim
Dodge Dakota
JOIN HERE
 Email

12/02/2005
03:37:18

RE: T-bar lift
IP: Logged

Message:
I have a 1994 V8 4x4, it appears that the t-bars are bone stock and the truck is a low as it can go. I'm heading up. Anyone know what the largest tire without clearance problems I can go with just the T-bar crank, and perhaps an angle lock in the back to balance everything out? Thanks



4WD
Dodge Dakota
JOIN HERE


12/02/2005
07:56:51

RE: T-bar lift
IP: Logged

Message:
I put 2 full rounds on mine, Kifted the fron about 1 1/2". Severely stiffened the front end. You will feel the bumps harder when your off-road.

I did it to keep the tires from hitting the fenderwell. I also went up to LT265/75/16 Durango XTR heavy duty A/T truck tires.

I noticed after 10K that it's wearing the inside of the tires unevenly. Recommend that that you take it in for an alignment/ camber check after you do this.

Sitting on a flat surface the nose is now slightly higher than the rear. Gonna add 2" lift blocks to the rear now :)



bump
Dodge Dakota
JOIN HERE


12/08/2005
01:40:56

RE: T-bar lift
IP: Logged

Message:
bump



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.