| From | Message |
Brian Russell
Dodge Dakota
JOIN HERE
6/14/2005
13:15:34
|
 Subject: lift for 04 2wd
IP: Logged
Message:
I did a 3" Fabtech suspension lift and a 3" PA body lift with 33's. I tried using 15x8 rims and they would not clear the front calipers on a 2004. The 16" rims from American Racing Wheels worked groovy. I don't have any pics up yet but I should have some soon.
|
rhino_rkw
Dodge Dakota
JOIN HERE
6/17/2005
04:37:45
|  RE: lift for 04 2wd
IP: Logged
Message:
The fabtech lift i have been told does not fit the 04 please tell me what was needed to do this.
|
therumblefish
Dodge Dakota
JOIN HERE
6/17/2005
22:13:16
| RE: lift for 04 2wd
IP: Logged
Message:
yes yes... pictures please!
|
Brian Russell
Dodge Dakota
JOIN HERE
6/25/2005
12:07:34
| RE: lift for 04 2wd
IP: Logged
Message:
I ordered the Fabtech kit from 4 Wheel Parts. It's the same kit for the 2003. Everything works fine. The only thing that didn't work as advertised was that in the kit, they give you add a leafs for the rear. It doesn't exactly tell you that it's only a 1.5" add a leaf. So you have to get different shackles or another add a leaf to level it out. I should have pics real soon. I'll have the before and after pics too. I've gotten quite a few good comments about it.
|
rhino_rkw
Dodge Dakota
JOIN HERE
6/27/2005
02:56:14
| RE: lift for 04 2wd
IP: Logged
Message:
I am into that. No bearing problems nothing? Cool. When you get some pics cant wait to see them.
|
rhino_rkw
Dodge Dakota
JOIN HERE
7/29/2005
03:20:57
| RE: lift for 04 2wd
IP: Logged
Message:
Any pics yet
|
Bobby
Dodge Dakota
JOIN HERE
8/20/2005
01:43:23
| RE: lift for 04 2wd
IP: Logged
Message:
i did the 3" front fabtech suspension lift for my 04 dakota, i had to ream the stock mouting hole on the frame to fit the upper control arm of the lift. i dunno why, but now i have a postive camber problem.. n e 1 no why?
here is a pic of my suspension
http://pictures.sprintpcs.com/i/72873488901_3300_1.jpg?ext=.jpg&border=2,255,255,255,1,0,0,0,0&outquality=90
|
rivermaniac
Dodge Dakota
JOIN HERE
8/20/2005
03:07:38
| RE: lift for 04 2wd
IP: Logged
Message:
you put the pin with the sliders backward from front to back , you need to flip it over 180* ...that happened to me also , don't ream anymore of the holes flip it over . It looks like it's the same , but our trucks , the frame is in an angle on the passenger side cause of the 4.7 motor mounting ...........so the pin in between the a arm has a slight angle that is not that noticible ..............
|
rhino_rkw
Dodge Dakota
JOIN HERE
9/06/2005
16:15:21
| RE: lift for 04 2wd
IP: Logged
Message:
Bobby i cant seem to pul up your link. Would you email me the picks.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
