| From | Message |
Rick T.
Dodge Dakota
JOIN HERE
5/19/2005
15:23:15
|
 Subject: Will 15x10s fit?
IP: Logged
Message:
I have a 01 qc 4x4 3" pa bl crank t bars. Will 15x10's fit without rubbing or sticking out too far? Please help!
Thanks Rick
|
99Dak5.2L4x4
Dodge Dakota
JOIN HERE
5/20/2005
14:19:16
|  RE: Will 15x10s fit?
IP: Logged
Message:
I have 99 Dak with a 3 inch Body lift and I had to hack the crap out of my fenders and bust out a sledge hammer to bend back some metal and then grind a bit to smooth it all out.
After all that I fit BFG 33s on 15x10s.
If I crank the wheels to the left or right and then take a real steep angle like turning and going up a really deep drive way like 45 degrees then I'll get a slight rub but other than that no rubbing at all under normal driving.
I love them and have gotten quite a few compliments. Makes the truck look cool and improves cornerning a lot because the stance is wider. I haven't had any problems with ball joints or anything after 20+ miles. I will save that i already installed moog uppers though so keep that in mind.
I've posted other stuff about this set up. do a search under my name
Bill
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
