From | Message |
Chris Dodge Dakota JOIN HERE
2/09/2005 11:49:31
|
Subject: torsion bars IP: Logged
Message: I have a 97 slt 4x4 and am considering cranking the torsion bars to get a 1 or 2 inches of lift in the front. Any negatives to this. Was it easy to do. any input would be great!!!
thanks
|
Snots Dodge Dakota JOIN HERE
2/09/2005 12:43:16
| RE: torsion bars IP: Logged
Message: Negatives? Some say a rougher ride. I did it to my truck - seems about the same to me. A trucks a truck, right!? Also, you should get an alignment after adjusting your torsion bars. Hope this helps. (I got close to about 1 1/2" after adjusting mine)
|
Chris Dodge Dakota JOIN HERE
2/09/2005 17:22:23
| RE: torsion bars IP: Logged
Message: Did you have any troubles doing it?
|
Jusitn Dodge Dakota JOIN HERE
2/14/2005 12:44:00
| RE: torsion bars IP: Logged
Message: i decided i want to crank mine up soon, where and how do you do it? i think i know but i just want to be sure TIA
|
newdaklover Dodge Dakota JOIN HERE
2/14/2005 22:18:07
| RE: torsion bars IP: Logged
Message: Won't tightening the torsion bars lift the front only and then leave the back stock??
|
justin Dodge Dakota JOIN HERE
2/15/2005 10:46:52
| RE: torsion bars IP: Logged
Message: yes it only raises the front...however i perosnally already have a add-a-leaf kit on the back and my rear sits 3inchs higher than the front (i think stock there it sits about an inch higher and the add-a-leaf raised it two inches) anyway it looks goofy and i want to level it but i don't know for sure where the torsion bars are cranked!
|
moose578 Dodge Dakota JOIN HERE
2/15/2005 19:12:23
| RE: torsion bars IP: Logged
Message: Oh that's simple. Just look for 2 rods that bolt underneath the cab. You'll see a bolt on each of them. Just crank them in but make sure that you keep it even. If not then it will really look messed up.
|
justin Dodge Dakota JOIN HERE
2/15/2005 21:17:34
| RE: torsion bars IP: Logged
Message: thnaks moose! i'll be doing that soon!
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|