From | Message |
greendak Dodge Dakota JOIN HERE
12/21/2004 15:19:16
|
Subject: question on 32s IP: Logged
Message: I am plannin on gettin a PA 3" body lift for my 97 2wd Dakota. Can I fit 32s on my stock 15x7 rims or should I stick w/ 31s?
|
MightyQuynh GenIII
12/22/2004 18:11:38
| RE: question on 32s IP: Logged
Message: Greendak,
I would stick with 31/10.50's with 15x7 rim. If you wanna go with 15's look on the board i think some people are selling some. i might be soon also sometime in january. I checked ebay and not to bad on there. but i personaly wouldnt go with any bigger. i run 15x8 33/12.50 on mine. Hope this helps.
Later
MightyQ
Colorado Wheeling
|
greendak Dodge Dakota JOIN HERE
12/22/2004 22:35:56
| RE: question on 32s IP: Logged
Message: ok, thanks. I looked at some different tire manufacturere websites on the net. Most of the tires I was interested in, being 31s or 32s, would require a 15x8 or wider rim. Oh well, guess I'll be buyin some wheels soon.
|
dkemm Dodge Dakota JOIN HERE
1/03/2005 22:59:04
| RE: question on 32s IP: Logged
Message: I have a 99 sport 4x4 xcab
came with 31x10.5x15
I now have BFG 33x10.5x15 with a PA 3" lift
I would think that the BFG's would fit on a 7" rim.
BFG is the only tire that I found that would not require new wheels (different offset) to minimize rubbing. I have some rubbing at full lock to lock turning, but love the extra height and the way they fill the wheel wells. I think that they may have actually have fit without the PA lift.
I would actually like to go with 34's, but that limits me to non radial interco LTB's which I hear can go out of round rather quickly.
-dk
|
2003QCDak Dodge Dakota JOIN HERE
1/04/2005 15:16:47
| RE: question on 32s IP: Logged
Message: Does anyone know if I can fit 32x11.5x15 with 15x8 rims on a stock 2003 4x4 without any lift? Or should I stick with 31x10.50 The backspacing on the rims is 3 1/4". Any idea how much this would hurt my gas milage?
|
maxwellsmart0 Dodge Dakota JOIN HERE
1/05/2005 19:20:43
| RE: question on 32s IP: Logged
Message: Greendak
If you only have a 2wd and only do a body lift you will not fit 32's without some major cutting if even that. I had 32's on my 98 2wd with a 3" suspension and a 3" body and they still rubbed without trimming. With this setup trimming is very little. I am selling both lifts and 32x11.50.r15 procomp muds on wheels if you are interested send me an email.
Regards
Chris
|
caquadman Dodge Dakota JOIN HERE
1/05/2005 23:48:44
| RE: question on 32s IP: Logged
Message: 2003QCDak, yes you can. I ran (and have them for sale)BFG AT 32x11.5x15 on my stock 2000 QC with not enough rubbing to even talk about. No cutting, no trimming. The only rubbing was on the left front, in reverse only?? on the inside fender well. Nonissue. They filled up the fender well very nicely. Looked great.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|