From | Message |
Tyler Dodge Dakota JOIN HERE
11/10/2004 01:13:23
|
Subject: Rancho lift IP: Logged
Message: Does anybody know what size tires you can fit with this lift? Thanks!
|
Tyler Dodge Dakota JOIN HERE
11/15/2004 22:45:27
| RE: Rancho lift IP: Logged
Message: Anybody?
|
Kory GenIII
11/15/2004 23:16:02
| RE: Rancho lift IP: Logged
Message: With just the 3" Rancho on the truck I was able to fit 33x12.5 on my 1998. With the stock wheels, I got a minimal amount of rubbing on the frame at full steering wheel travel. I went to 15X10 Weld wheels with a slightly wider offset from stock and had no rubbing on the fram, but had to trim a little of the inner fender by the cab and a little bit off the front plastic lower bumper to eliminate the rubbing throughout the full suspension travel.
In my opinion, I would go with 33X12.5's. If you're using stock wheels, just know that you'll get a little rubbing on the frame. If you go with wider wheels, the trimming should be minimal.
~Kory 1998 Dakota Sport, 4X4, 5.2L, 5-spd, Rancho 3
|
Tyler Dodge Dakota JOIN HERE
11/16/2004 22:33:35
| RE: Rancho lift IP: Logged
Message: Thanks for the info. I want to get 33's but I don't really want a body lift...I'd rather go with the suspension. Thanks again!
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|