| From | Message |
dusterkid74
Dodge Dakota
JOIN HERE
3/10/2002
11:05:23
|
 Subject: steering linkage question.
IP: Logged
Message:
What do I do with the linkage on my daotato get it to work with the body lift I put on.
|
kevin
Dodge Dakota
JOIN HERE
3/10/2002
18:57:15
|  RE: steering linkage question.
IP: Logged
Message:
Depending on the lift brand you should have gotten a splinned steering shaft extension. When I put it on my 98 Dakota 4x4 it was the hardest part of the lift other than the front bumper brackets. To do mine I undid the front 4 body mount bolts and raised the body after I removed the driver side tire. I lowerd the frame away from the body and got the extension on. I am sure there are easier ways to do this, but this worked for me.
-kevin
check out my truck at http://moparthrash.tripod.com
|
4wDakota
GenIII
3/11/2002
10:09:38
|  RE: steering linkage question.
IP: Logged
Message:
Hey kevin, great truck!
What did you do have for a 2" suspension lift?
Corey
98 CC 4x4, 5.2 Auto 3.55LSD
|
kevin
Dodge Dakota
JOIN HERE
3/11/2002
13:44:52
| RE: steering linkage question.
IP: Logged
Message:
For the two inch lift I put a two inch block in the rear and cranked my torsion bars. After I get new tires, I am going to get the torson bars meant for the v8 and some new shocks, this should allow me to keep the hight without so much cranking.
-Kevin
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
