| From | Message |
bad dakota
Dodge Dakota
JOIN HERE
7/26/2004
02:39:57
|
 Subject: torsion bar question
IP: Logged
Message:
hey guys, i finished my body lift the other day and i am going to crank my torsion bars, but i have a few questions before i do it.
How many times do i need to turn the torsion bar bolt to raise the front about 1.5".
And about how much would an alignment cost me.
|
03Dakota
Dodge Dakota
JOIN HERE
7/26/2004
09:55:57
|  RE: torsion bar question
IP: Logged
Message:
I had the alignment shop turn my torsion bars and do the alignment at the same time. Cost me $60.00 for both. I don't have a lift YET but it makes a big difference in the look of the truck just by leveling it out with the torsion bars. What type of body lift did you go with?? 2" or 3"?? What size tire did you put under it??
|
DakHunter
Dodge Dakota
JOIN HERE
7/26/2004
11:39:48
| RE: torsion bar question
IP: Logged
Message:
about 3 full turns gave me roughly an inch and a quarter
|
bad dakota
Dodge Dakota
JOIN HERE
7/26/2004
13:12:10
| RE: torsion bar question
IP: Logged
Message:
thanks, i have a 3" body lift with 32x10.50 swamper TSL Radials on 15x8 eagle alloy rims, and i have very little rubbing on the front valance and the rear of the fender (mostly cause of the mud flaps, but i am going to take them off and it will give me a little more than a 1/4 inch of space).
thats why i need to turn by bars some, so i don't have to cut too much of my fenders if i have to and i also wanted my truck to be leveled out a little bit too.
|
reddak98
Dodge Dakota
JOIN HERE
7/27/2004
12:41:03
| RE: torsion bar question
IP: Logged
Message:
Hi to all,
just to let you know that I crank my t-b a good 2 inch 6 month ago, and I never got any probleme.
my ride stil the same and I am almost level with 2 inch block in the back....
Just to let you know.
Alex
1998 4x4 v6 a full 2 inch lift for 32$
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
