| From | Message |
Roaddog
Dodge Dakota
JOIN HERE
7/06/2004
08:44:35
|
 Subject: 3" bodylift w/ an Airaid
IP: Logged
Message:
Question for anyone running a 3" bodylift w/ an Airaid or K&N intake kit. The kits say, not designed for body lift.
Thanks
|
XtrmCore33
Dodge Dakota
JOIN HERE
7/11/2004
16:28:49
| RE: 3
IP: Logged
Message:
i have a dakota v6 with a 3 inch body lift and running an airaid intake its a tight fight but no problems at all
|
Roaddog
Dodge Dakota
JOIN HERE
7/11/2004
17:10:53
| RE: 3
IP: Logged
Message:
Any Pics? Do you have the tube?
|
XtrmCore33
Dodge Dakota
JOIN HERE
7/11/2004
18:15:53
| RE: 3
IP: Logged
Message:
no pics just yet been too busy working and working on my truck
but will have some soon in the process of buying bfg 33x10.50r15 .... other than that it fits well. no mods required
|
Roaddog
Dodge Dakota
JOIN HERE
7/11/2004
23:13:42
| RE: 3
IP: Logged
Message:
Do you have the stock air box from the throttle body, or the tube they sell?
|
XtrmCore33
Dodge Dakota
JOIN HERE
7/12/2004
03:16:45
| RE: 3
IP: Logged
Message:
from the stoke throttle body to the air box stays stock but when you put on the new intake you have to take out the stock air filter and housing not a big deal though comes out fairly easily takes about 30 min im trying to buy a new digital camera so i can take pics
|
Roaddog
Dodge Dakota
JOIN HERE
7/12/2004
10:19:28
| RE: 3
IP: Logged
Message:
Well here's the rest of the story...I bought the Airaid kit. It's called a quick kit. Take off the lid of the air box, remove the filter, drop in the metal adapter w/ filter attached. Then just connect the intake hose back up and done. But when I added the body lift Sat. the hose gets pulled kinda funky. I'm wondering If this is a problem. Obviously I have the 4.7 V8 and you don't. But no one else seems to answer.
Thanks
|
sixlugz
Dodge Dakota
JOIN HERE
7/19/2004
16:24:59
| RE: 3
IP: Logged
Message:
yeah im kinda wondering about this too... im wanting to do a 3" body lift on my dak, granted its a 3.9 but i have the airaid and the poweraid throttle body spacer... i guess im just sticking around on this post, i dont have any pics either... hope someone does, might have to DIY the set-up.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
