| From | Message |
NITE WOLF
Dodge Dakota
JOIN HERE
5/20/2004
11:41:29
|
 Subject: TIRE QUESTION
IP: Logged
Message:
i have a 3inch body lift on my 00 dakota ext cab,and i was wondering if any of you guys have put 35s on your truck ,i currently am running 33s
the 35s look like they will fit if i do some trimming on the front bumper for turning.
need some one elses 2cents on this.
|
Brian22m
Dodge Dakota
JOIN HERE
5/23/2004
04:07:03
| RE: TIRE QUESTION
IP: Logged
Message:
I have 35 inch Goodyear Wrangler MTR's.. but thats with 5.5 inches of suspension lift and i have a little more room than i expected.. but clearing 35s with just a 3" body lift.. your going to probably to a 2 inch torsion bar lift... either that , or cut out your entire fenders, hope this helps
|
Mark Peters
Dodge Dakota
JOIN HERE
5/27/2004
18:01:48
| RE: TIRE QUESTION
IP: Logged
Message:
What kind of suspension lift do you have? Do you like it?
|
Eric Buskirk
Dodge Dakota
JOIN HERE
6/01/2004
10:51:27
| RE: TIRE QUESTION
IP: Logged
Message:
I have a 00 and want to know what is the largest size tires I can put on it without a lift.
|
NITE WOLF
Dodge Dakota
JOIN HERE
6/01/2004
13:35:22
| RE: TIRE QUESTION
IP: Logged
Message:
i have a performance accessories body lift,the lift is great no complaints at all,the biggest i had on my dakot without a lift was 31-10.5-15
|
Eric Buskirk
Dodge Dakota
JOIN HERE
6/01/2004
13:49:26
| RE: TIRE QUESTION
IP: Logged
Message:
Nite Wolf, Do you think I can put 32 or 33 on it?
|
NITE WOLF
Dodge Dakota
JOIN HERE
6/03/2004
12:24:36
| RE: TIRE QUESTION
IP: Logged
Message:
HEY eric,
you might be able to fit 32's on it if you crank the torsion bars up a bit.
my 33s rubbed a little until i cranked mine up a bit.
|
MightyQuynh
Dodge Dakota
JOIN HERE
6/05/2004
09:04:48
| RE: TIRE QUESTION
IP: Logged
Message:
You can fit 33's on stock, wil have to do a little trim and at full lock you will rub the frame. with a 3in lift, same thing but wont have to trim as much, craking the torsion bars will help. if you want a few more inchs in back you could add a leaf or hanger reversal/trucking suspesion. when i did my shackle, found my hanger is the other way so i had to cut it off and reverse it and added a 2in shackle. many people i know run 33/12.50s on stock too. with the 589's because of the back spacing you will have to trim quite a bit i think. I have reverse hangers in back and torsion bar cranked up 1.5-2inch, and had spot fitted 33's. do a search on this board. you'll find some grat info, also fourxfore site is really good, check it out.
|
mightyquynh
Dodge Dakota
JOIN HERE
6/05/2004
10:52:18
| RE: TIRE QUESTION
IP: Logged
Message:
oops that comment was bad dak on post next to this forgot which thread i was on sorry but i hope info helps
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
