| From | Message |
jasonjmw
Dodge Dakota
JOIN HERE
2/17/2004
11:02:46
|
 Subject: Tire Question
IP: Logged
Message:
Hey all,
I have a '97 ext.cab 5.2V8 4x4 dakota with 3.92's
and have the stock 31's on. I was wondering if I could put 33" BFG's on without lifting it? and will there be alot of rubbing when turning etc.
Thanks
|
SoCal Dakota
Dodge Dakota
JOIN HERE
2/17/2004
13:44:14
|  RE: Tire Question
IP: Logged
Message:
I know that one of the people on this site have ran 33's on a 4x4 completely stock. If you want to be safe crank up the torsions a butt hair.
|
draugluin
Dodge Dakota
JOIN HERE
2/17/2004
13:54:48
| RE: Tire Question
IP: Logged
Message:
It's possible, but I believe you have to have a Hanson Bumper. Atleast I think that's what it is called.
|
jasonjmw
Dodge Dakota
JOIN HERE
2/19/2004
12:01:20
| RE: Tire Question
IP: Logged
Message:
.
|
cilrah
Dodge Dakota
JOIN HERE
2/19/2004
21:05:12
| RE: Tire Question
IP: Logged
Message:
No way man. I have a 2002 dakota with a 3" Rancho lift and had 33x12.50's on 15x8 wheels test fitted on my truck and the front wheel completely hit the front bumper when the wheels were turned. The back wheels fit just fine. You would have to do some trimming on the front bumper or replace it with another bumper. The wheel seemed to clear the rear of the front wheel well. If you wanna run those size tires I'd try a 3" body lift, you should be able to get that done alot cheaper then the suspension lift. Good luck.
|
SoCal Dakota
Dodge Dakota
JOIN HERE
2/20/2004
14:17:15
| RE: Tire Question
IP: Logged
Message:
forexfour ran 33's stock, with and without the new bumper
http://www.caoffroaders.com
http://www.dodgedakota.net/boards/raise/1906.html
|
Mopar 4-ever
Dodge Dakota
JOIN HERE
2/21/2004
18:51:04
| RE: Tire Question
IP: Logged
Message:
They were 33-10.50's. Not 33-12.50's.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
