| From | Message |
m
Dodge Dakota
JOIN HERE
2/16/2004
19:29:27
|
 Subject: 2001 QC With Rancho Lift
IP: Logged
Message:
If anyone's interested... I've only got one pic for now. I'll add more later.
2001 QC 4.7 Rancho 3" Suspension lift, RS9000 shocks, BFG AllTerrains 285/75/16 on stock wheels,Garvin Industries cargo rack, Hella lights with 100W bulbs, Flowmaster CAT back, Torsion bars cranked slightly.
http://f1.pg.photos.yahoo.com/ph/gyinpdx/album?.dir=/ab03
|
cilrah
Dodge Dakota
JOIN HERE
2/16/2004
22:18:21
| RE: 2001 QC With Rancho Lift
IP: Logged
Message:
When I try to go to your link it says the pic is inacessable (won't open). I did a 3" Rancho on my 02 Dakota and would like to see yours. Thanks.
|
oyotaco
Dodge Dakota
JOIN HERE
2/17/2004
14:31:57
| RE: 2001 QC With Rancho Lift
IP: Logged
Message:
yeah, the link isnt working. I want to see what those 285's and the lift look like on the QC, i have an 02 QC that is going to need tires in the near future.
|
M
Dodge Dakota
JOIN HERE
2/17/2004
15:51:36
| RE: 2001 QC With Rancho Lift
IP: Logged
Message:
Sorry the link isn't working. Anyone know of a better site to host the pics.
|
forexfour
GenIII
2/17/2004
17:03:00
| RE: 2001 QC With Rancho Lift
IP: Logged
Message:
Shoot it to me and I will put it up for you.
E-mail is in the envelope
http://www.caoffroaders.com
|
forexfour
GenIII
2/17/2004
17:14:02
| RE: 2001 QC With Rancho Lift
IP: Logged
Message:
UGH I poted the wrong address. This one is right Sorry
http://www.caoffroaders.com
|
M
Dodge Dakota
JOIN HERE
2/17/2004
18:13:59
| RE: 2001 QC With Rancho Lift
IP: Logged
Message:
forexfour,
Thanks for posting the pic!
M
|
forexfour
GenIII
2/17/2004
21:35:53
| RE: 2001 QC With Rancho Lift
IP: Logged
Message:
No Problem bud!
Nice!
Chris
http://www.caoffroaders.com
|
erckota4x4
Dodge Dakota
JOIN HERE
2/17/2004
22:48:29
| RE: 2001 QC With Rancho Lift
IP: Logged
Message:
Thats sweet dude!!!! I love it.
|
Skeletor86
Dodge Dakota
JOIN HERE
2/18/2004
08:10:12
|  RE: 2001 QC With Rancho Lift
IP: Logged
Message:
Any problems with installing the lift? I have a problem with the left front of mine bottoming out against the front left bump stop, did the 9000 help with that?
01' QC 4x4 4.7 5spd 3.92
|
M
Dodge Dakota
JOIN HERE
2/18/2004
15:00:18
| RE: 2001 QC With Rancho Lift
IP: Logged
Message:
Skeletor86,
I haven't experienced any bottoming out problems with the lift. The 9000's sure allow for some noticeable versatility in adjustments. They were a great value for the ride they offer. The shocks wont limit the amount of travel the suspension takes, only the rate in which it travels. I suppose that at the firmer settings, the suspension compression may be delayed enough to keep it from bottoming out on all but the most extreme of bumps.
|
Donkey
Dodge Dakota
JOIN HERE
2/21/2004
00:22:18
| RE: 2001 QC With Rancho Lift
IP: Logged
Message:
I've also installed a Rancho 3" Suspension lift with RS9000 shocks, but have a serious vibration in the rear when breaking. Have you had any similar problem?
|
M
Dodge Dakota
JOIN HERE
2/23/2004
15:45:17
| RE: 2001 QC With Rancho Lift
IP: Logged
Message:
I've not had any vibration problems with the lift. I do know from experience that having tapered blocks installed backwards, or not using a tapered block on taller lifts will cause unneccessary binding on the U-joints. The Rancho lift is not a tapered block, but maybe you got one in your kit as a mistake??? I'd start by looking at the block placement and go from there. Also, you should retorque the U-bolts after a couple hundred miles since they will actually stretch. Possibly you have some loosness going on??? Hope this helps.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
