Forums
Forum Tools
|
 |
00:39:26 - 12/20/2024
Raised / Lifted Dakotas
| From | Message |
Matt
Dodge Dakota
JOIN HERE
1/12/2004
04:03:39
|
 Subject: Front end protection after body lift?
IP: Logged
Message:
I installed a p.a. 3" body lift on my 2000 Dakota awhile back. Everthing is good except now that big plastic guard for up under the front end(had a removable hole to get at the oil filter) does not fit. That really isn't a problem other than it leaves the transmission lines running to the cooler exposed and open. Has anybody found a good way to fix this? anything from making the stock guard work or putting on some type of brush guard? thanks
Matt
'00 4X4, 4.7L 3.92 trac-loc, club cab, black, 32X11.50R15 BFG's, K&N intake/filter, powerdyne t/b spacer, cat-back exhaust
|
brianl
GenIII
1/13/2004
16:37:30
|  RE: Front end protection after body lift?
IP: Logged
Message:
I just made a skidplate out of a piece of diamondplate. Cost me $40.
Brian
Dynomax UltraFlo, V8 TB, Alpine 6-disc, 180 T-Stat, PA 3" Lift, Prothane bushings, Autolite 3923, homemade intake, Rancho RS9000, Tonneau, Herculiner Sprayed-In, 33" Dueler A/T, AR Baja 16x8 Wheels, MOOG Balljoints and Ties, Powerslots w/ Raybestos PG pads
|
Matt
Dodge Dakota
JOIN HERE
1/20/2004
01:11:13
| RE: Front end protection after body lift?
IP: Logged
Message:
Thanks,, good tip.. just made one at a friends shop. Really wanted something more along the lines of a pushbumper/brushguard,, but cant beat this for the $$
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
