Forums
Forum Tools
|
 |
00:30:48 - 12/20/2024
Raised / Lifted Dakotas
| From | Message |
brianl
GenIII
 
11/14/2003
21:37:24
|
 Subject: Just installed PA 3" lift
IP: Logged
Message:
Just installed the PA 3" lift with AR Baja 16x8 wheels and 285/75/R16 Bridgestone Dueler A/T's. Install was pretty easy, no major hiccups. Had to trim out some of the fenderwell, but not much. Need to get some fender flares now and I'll be all set! My profile has an updated pic if interested.
Brian
Dynomax UltraFlo, V8 TB, Alpine 6-disc, 180 T-Stat, PA 3" Lift, Prothane bushings, Autolite 3293, homemade intake, Rancho RS9000, Tonneau, Herculiner Sprayed-In, 33" Dueler A/T, AR Baja 16x8 Wheels, MOOG Balljoints and Ties, Powerslots w/ Raybestos PG pads
|
Jeff03
Dodge Dakota
JOIN HERE
11/14/2003
22:24:03
| RE: Just installed PA 3
IP: Logged
Message:
Looks good. Get some clear corners too and you'll be all done!
|
Noclearcrners
Dodge Dakota
JOIN HERE
11/15/2003
11:17:03
|  RE: Just installed PA 3
IP: Logged
Message:
Yea....all done!
Then it`ll look like every other truck out there.
Your truck looks great the way it is!
|
brianl
GenIII
11/15/2003
17:53:01
| RE: Just installed PA 3
IP: Logged
Message:
I'm not a huge fan of the clear corners. I'd rather spend my cash on nerf bars, ignition setup, etc. Just my preference though.
Brian
Dynomax UltraFlo, V8 TB, Alpine 6-disc, 180 T-Stat, PA 3" Lift, Prothane bushings, Autolite 3293, homemade intake, Rancho RS9000, Tonneau, Herculiner Sprayed-In, 33" Dueler A/T, AR Baja 16x8 Wheels, MOOG Balljoints and Ties, Powerslots w/ Raybestos PG pads
|
cheeup
Dodge Dakota
JOIN HERE
11/25/2003
10:59:16
| RE: Just installed PA 3
IP: Logged
Message:
so what goes into installing a body lift? I've got a 2k QC
|
brianl
GenIII
11/25/2003
13:05:25
| RE: Just installed PA 3
IP: Logged
Message:
About 9 hours of time. The actual lift install is easy. Checking all of the componenets for clearance and installing the bumpers and shifter took the most time.
Brian
Dynomax UltraFlo, V8 TB, Alpine 6-disc, 180 T-Stat, PA 3" Lift, Prothane bushings, Autolite 3923, homemade intake, Rancho RS9000, Tonneau, Herculiner Sprayed-In, 33" Dueler A/T, AR Baja 16x8 Wheels, MOOG Balljoints and Ties, Powerslots w/ Raybestos PG pads
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
