Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:52:38 - 12/20/2024

Raised / Lifted Dakotas
FromMessage
jr
Dodge Dakota
JOIN HERE
 Email

11/10/2003
10:06:00

Subject: tortion bars
IP: Logged

Message:
I have an 02 dakota with a 3" bodylift, and i find it sitting slightley nose down, i want to remedy the situation by cranking my tortion bars, how high can i crank them without breaking anything, and also do they make blocks that i can put between the leaf springs and the axle for an extra inch or two??



Steve calabro
Dodge Dakota
JOIN HERE
 Email

11/10/2003
11:09:37

RE: tortion bars
IP: Logged

Message:
torsion bars can be torqued for about 1-2 inches, i just cranked mine this weekend about halfway and got about an inch of lift out of the front. Steve



Don
Dodge Dakota
JOIN HERE
 Email

11/11/2003
15:07:38

RE: tortion bars
IP: Logged

Message:
Well I have a 02 Dakota and just install 265/70/16 Baja tires and there rubbing on my fenders, wanted to crank my tortion bars but they are all ready at there max, Now I'm looking for a 2 inch lift kit.



Mr_Bub
Dodge Dakota
JOIN HERE


11/18/2003
00:53:36

RE: tortion bars
IP: Logged

Message:
can anyone write down how to adjust the bars to level a 91 dakota?



Steve calabro
Dodge Dakota
JOIN HERE
 Email

11/18/2003
09:55:40

RE: tortion bars
IP: Logged

Message:
crawl under your truck and find where the torsion bar ends (i believe this is on the tranny crossmember) and using a ratchet with the rigth socket (my 96 used a 15/16) either torque the tensioning bolts up if the front is sagging or loosen them if the front is too high. i believe you can put a level on the inside bottom of the door frame to level out your truck, just make sure you are on level ground also.
Hope this helps, Steve



shane
Dodge Dakota
JOIN HERE
 Email

11/18/2003
19:45:29

RE: tortion bars
IP: Logged

Message:
Can you crank your tortion bars on a 94' 2wd dakota?



Steve calabro
Dodge Dakota
JOIN HERE
 Email

11/19/2003
08:57:30

RE: tortion bars
IP: Logged

Message:
sorry, 2wds do not have torsion bars, you would have to get coil spacers to lift the front.
Steve



troublemaker
Dodge Dakota
JOIN HERE


11/19/2003
11:01:01

RE: torsion bars
IP: Logged

Message:
Or get new coils. Some guy on ebay is selling coils for $69

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33582&item=2442979669



mort
Dodge Dakota
JOIN HERE


11/19/2003
17:52:32

RE: tortion bars
IP: Logged

Message:
doez hershey make them tortion barz?



john89
Dodge Dakota
JOIN HERE
 Email

4/09/2006
13:18:47

suspension kit
IP: Logged

Message:
I've looked and looked, and im being to think there is none for my 2003 dodge dakota 4wd.
If anyone knows anything, it would be helpful?



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.