| From | Message |
98dakota
Dodge Dakota
JOIN HERE
10/25/2003
14:40:03
|
 Subject: torsion bars
IP: Logged
Message:
How much could i raise the front end on my 98 dakota sport 2wd just by adjusting the torsion bars? And then what size lift would would i need in the back? 1.5 blocks in the back?
|
Matt
Dodge Dakota
JOIN HERE
10/25/2003
20:55:41
|  RE: torsion bars
IP: Logged
Message:
You cant raise it with torsion bars b/c they only come on 4x4's. Get some coil spacers to lift the front. They have them on ebay and such.
|
Zam
Dodge Dakota
JOIN HERE
10/26/2003
07:31:09
| RE: torsion bars
IP: Logged
Message:
I don't know what year they don't, but 2000+ 2wd's have torsion bars.
98Dak, don't crank them more than 2" or you'll wear down your ball joints and such. And get an alignment after you do it.
|
Matt
Dodge Dakota
JOIN HERE
10/26/2003
10:22:38
| RE: torsion bars
IP: Logged
Message:
He doesnt have torsion bars...they are only for 4 wheel drives. He has coil springs in the front. Get some 2" spacers to insert under the springs.
|
98dakota
Dodge Dakota
JOIN HERE
10/26/2003
13:43:37
| RE: torsion bars
IP: Logged
Message:
How much are those 2in spacers and where can i get them?
|
Matt
Dodge Dakota
JOIN HERE
10/26/2003
13:51:47
| RE: torsion bars
IP: Logged
Message:
Go on ebay and type in dakota and its under the suspension sub-category. They usually run like $20-$50 depending on what quality ya get. Hope this helps.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
