| From | Message |
md
Dodge Dakota
JOIN HERE
9/24/2003
09:29:52
|
 Subject: 2" Fabtec Springs
IP: Logged
Message:
I have a 2000, 4.7, Club Cab. I want to level the front and have the 2" springs - I know they are not engine/body specific. Sooooo,
Has anyone actually installed these springs on a V8?
If so, I wonder if you would share with me how much ACTUAL lift you received by this instal.
I've searched this site high and low and I have yet to see a definitive answer to this question. A lot of theoretical "guestimates", but no hard data.
Any help would be appreciated.
Thanks,
MD
|
NJQUAD2BY
Dodge Dakota
JOIN HERE
9/24/2003
19:39:21
| RE: 2
IP: Logged
Message:
Abour 3/4" is what Fabtech told me about a year ago. I went with 2" Daystar spacers and got about 3" of lift. In hind site I wish I went with 1 1/2" spacer. I think the ride would have been a little better.
|
md
Dodge Dakota
JOIN HERE
9/24/2003
23:27:03
|  RE: 2
IP: Logged
Message:
Thanks for your help. Not sure 3/4 of an inch is worth the money or effort.
MD
|
Matt Jones
Dodge Dakota
JOIN HERE
9/29/2003
21:04:10
| RE: 2
IP: Logged
Message:
I bought and had the Fab Tech suspension 3" installed. I was told you'd get about 2" from the springs alone, but be aware that if you have the stock 16" alloys the won't fit. My 3" is a true 3+ in the front, to the point I now need to find 1.5" shackles to raise the rear (even with the add leaf!)
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
