| From | Message |
SoCal DAKOTA
Dodge Dakota
JOIN HERE
8/20/2003
22:27:51
|
 Subject: ABS Light and ebrake light on after lift
IP: Logged
Message:
Just got a 3" fabtech installed on a 98 dakota club cab v8 and it has the abs light and the ebrake light on now. fluid is fine, what could be wrong ? Bad sensor somewhere ? break in a wire? I have no idea .. help please
|
South1
Dodge Dakota
JOIN HERE
8/20/2003
22:51:03
| RE: ABS Light and ebrake light on after lift
IP: Logged
Message:
Check your brake lines very carefully. Make sure you didn't kink any lines or fray wires when you lifted it. Might just wanna try a reset first to see if that's the case. My .02
|
brit
Dodge Dakota
JOIN HERE
8/20/2003
23:01:28
| RE: ABS Light and ebrake light on after lift
IP: Logged
Message:
wheel speed sensor unplugged?
|
SoCal DAKOTA
Dodge Dakota
JOIN HERE
8/24/2003
06:32:43
| RE: ABS Light and ebrake light on after lift
IP: Logged
Message:
Well, I went searching and searching and I actually found a post where someone mentioned checking the battery cables. Well earlier that day when the light came on I was messing with the cables because my stock dodge alarm went off and I unplugged the battery. Well I tighted up my loose ground strap and the light hasn't come on since. I even took it to my friend at dodge and he hooked up the ODB2 reader and found that the "cab module" code popped up but that was when I had the light on / issue still.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
