Message: That is a nice size tire. What is the BS on those rims?
I would think the tire rim combo would fit but depending on the BS the tire may stick out so far and rub the outside of the fender.
If the BS is 4 - 4.5" they will stick out like the AE 589's, prolly like 2" -3"'s further from the fender than the stock rims/tires. That is where your rub problem will come into play. But I do not know. Just trying to add some input from what I have learned.
Never late for a Tee time or wheelin with my buddies! Always ready for both!!!
Message: I didnt crank the torsion bars up at all. All I had to do was trim the front air dam. Basically the corner.
What I did was I took a piece of tape and went from the upper corner where the metal bumper and the plastic dam met and started there and angled it down and to the front of the truck. I wanted it to look as stock as possible. so the air dam now instead of being straight down at the end it has a slight degree sweep. think of this ] as the edge of the air dam I just cut it so it had this / angle. the rear of the plastic wheel well needs to have the lower inside corner trimmed. I went overboard on mine and trimmed too much But other wise everything fits fine. I dont know if it will work with aftermarket rims I do know it works with stock 15x8 rims
Rob
Subject: Tire fit ? please
