From | Message |
kc8lbn GenII
7/23/2003 15:15:45
|
Subject: Gen 2 fiberglass fender pics IP: Logged
Message:
|
kc8lbn GenII
7/23/2003 15:19:00
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: These pics were posted for Other Bill please direct all questions to him, I'll be the first.
What is the opening measurement across the bottom of the fender? I run a 37" x terrain will they shove up into there?
|
dweishaar GenIII
7/23/2003 22:55:59
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: need to get some paint on those bad boys
The Baja Dak
|
other bill Dodge Dakota JOIN HERE
7/24/2003 13:23:35
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: Thanks for the nice compliments dweishaar! These were photos taken during my test-fit. They are now back off and awaiting an opening at the paint shop down the road. Should be back on (painted)for good in a few weeks.
|
other bill Dodge Dakota JOIN HERE
7/24/2003 20:55:19
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: Okay kc8lbn,
I measured this evening and they are right at 37" at the bottom of the opening. With the height gained in a solid axle swap you should be fine. Your tires will most definately stick out more too....and thanks for helping me share the photos.
|
moparnocar Dodge Dakota JOIN HERE
7/27/2003 03:35:24
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: a few questions? where did you get those fenders? i have never seen those made for genII daks. do you have the 4 inch trailmaster and a three inch body lift? what size tire are you running?
|
other bill Dodge Dakota JOIN HERE
7/28/2003 10:29:58
| RE: Gen 2 fiberglass fender pics IP: Logged
Message:
1. The fenders are brand new from Glassworks Unlimited (they are not yet listed on their website). I have the 1st set that have been mounted and photo'd.
If you call them, ask for Tim and tell him you saw them here.
If you order them, ASK ABOUT DELIVERY! We found out the hard way that where I live(MD), the shipper adds $65 for delivery to a residence! Had we known(huh Tim), I could have had them delivered to a friends' business and saved that $$!
2. Yes, I have the 4" lift, but with the 2" body lift (much less work than the 3").
3. Those are 33x10.5x15 BFG A/T KOs in the photo. I pared down from choosing a 12.5 wide to prevent rubbing. With a rig this light I don't think wider tires are needed, plus it reduces the amount of weight (weight=wear) I am slingin' around on the end of my spindles.
|
other bill Dodge Dakota JOIN HERE
7/30/2003 17:29:17
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: Fenders went to the paint shop today.
|
Jason Dodge Dakota JOIN HERE
7/31/2003 04:33:09
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: Other bill, where in maryland do you live? I live up in BelAir. You wanna go wheelin? email me shabazjenkinz@hotmail.com
|
other bill Dodge Dakota JOIN HERE
7/31/2003 19:28:44
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: I am down in ST Mary's County, stationed at NAS Patuxent River. Are there places to wheel in MD? Since transferring here I have only been off-road in VA (outside of Harrisonburg).
|
jason Dodge Dakota JOIN HERE
8/02/2003 05:06:50
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: I have a few places around the harford county area, but theirs supposed to be an offroad park on the pa line, $10 yearly membership, was thinking of heading up soon. My friend has the flyer, so i can get back to you on the details.
|
jason Dodge Dakota JOIN HERE
8/04/2003 03:16:40
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: Other bill whats your email, i have some question about you dakota. thanks.
|
other bill Dodge Dakota JOIN HERE
8/04/2003 12:07:58
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: I don't know alot about anything, but do know a little about everything. The guy who has done more as far as research is definetly Walt.
I have done all the work to my rig myself (installing, modifying, fabricating).
billingerb@navair.navy.mil
|
other bill Dodge Dakota JOIN HERE
8/12/2003 18:48:25
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: Fenders are painted and back on. Am getting the factory pinstripe done Friday. Wouldn't want to prematurely post a picture and offend somebody with a mod to my rig that is not fully complete!
|
88sport4x4 Dodge Dakota JOIN HERE
8/31/2003 20:52:55
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: how much were those fenders?
|
Jim H. Dodge Dakota JOIN HERE
9/01/2003 14:41:16
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: sort of off the topic, but where did you get the pre-runner bar? looks great!
|
other bill Dodge Dakota JOIN HERE
9/02/2003 20:47:17
| RE: Gen 2 fiberglass fender pics IP: Logged
Message: 88Sport,
The fenders are from Glassworks Unlimited. Email them for a price. They will fit 87' to 96' (gen I & gen II dakotas). The reason I say this is that I got their 1st set and don't want to tell you something different than what they are actually asking.
Jim H,
I built the pre-run bar myself! Thanks for the compliment!!
By the way, fenders are complete (with stripes). Will get a picture soonest. kc8lbn, I may have to send them to you again to post, buddy.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|