Forums
Forum Tools
|
 |
00:53:26 - 12/20/2024
Raised / Lifted Dakotas
| From | Message |
TadG
Dodge Dakota
JOIN HERE
7/21/2003
18:22:51
|
 Subject: Lift for '03 Dak?
IP: Logged
Message:
I have looked everywhere, and all I can find is the TS lift for an '03 Dakota 4X4 QC. Does anyone know if any companies make a body lift for the '03? Thanks. Tad
|
Tracy H
Dodge Dakota
JOIN HERE
7/21/2003
21:51:00
| RE: Lift for '03 Dak?
IP: Logged
Message:
I'm fairly certain that the PA lift will work on you '03, although their website does not state it. I headed up a group buy for this body lift kit and there was one guy that had an '03 and asked the same question. I called a local Dodge dealer and PA. The dealer said that there were no significant changes to the body, so it should work. PA said that they had not one of these trucks in their shop yet to try it out. I never heard back from the guy from the group buy, so I can only that it worked. You might want to call PA and ask them, b/c that was several months ago when I called.
GL, ~Tracy
'00 4x4 SLT QC 4.7 Auto 3.55LSD *My Dak Pics*
3" PA Body Lift, BFG AT 33x12.5x15 on AE 15x8 149's, Cranked Torsion Bars, Gibson Dual Stainless Rear Catback, Stainless K&N Clone Intake, TPS Sensor @.78v, Relocated IAT, Powerslot Rotors & Hawk Pads, Autolite 3923 & Stant 180° T-stat, T-Rex Stainless Nerf Bars ... Ordered Mods: ProComp 9000 Shocks, Fastman 68mm, Jeep H.O. Cams, Leach PCM Flash
|
TadG
Dodge Dakota
JOIN HERE
7/22/2003
18:52:20
| RE: Lift for '03 Dak?
IP: Logged
Message:
Thanks Tracy, I called Dodges technical guys and they confirmed that nothing changed which would affect a body lift. Now I need to figure out where to find 16X8's in a 6 to 4.5 bolt configuration. The only thing I can find is 15X8's. I like your AE's. They don't make your style in 16X8's in Dodge config. Darn it... Tad
|
Tracy H
Dodge Dakota
JOIN HERE
7/23/2003
12:05:12
| RE: Lift for '03 Dak?
IP: Logged
Message:
Tad,
Check out this link AE 149 and look for the following numbers 1496-7864 for chrome & 1499-7864 for polished. Those should be 16x8 - 6 on 4.5 wheels. I think they also had the 146s in that size too. I got mine from a guy in PA ... if you want I can try to find his name for you. His prices were great and he also had blemished wheels too for super cheap ... most you had a hard time finding the blemish. Let me know.
~Tracy
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
