| From | Message |
JJ02QC
Dodge Dakota
JOIN HERE
4/20/2003
01:37:32
|
 Subject: 2" body lifts
IP: Logged
Message:
One more question guys, I am looking at the PA 2" body lift to add to my 3" Fabtech susp. lift (the 265/75 rub like crazy even when trimmed). All I have found online is the 2" for '97-'99 Daks. I think this will work for my '02 Quad Cab also but just want to double check. Am I correct?
|
Joey
Dodge Dakota
JOIN HERE
4/22/2003
20:45:32
| RE: 2
IP: Logged
Message:
im wondering the same thing about my 2002. If i cant get an answer i guess I will just have to get it and see.
|
JJ02QC
Dodge Dakota
JOIN HERE
4/22/2003
23:21:57
| RE: 2
IP: Logged
Message:
joey, I think that the problem is going to be the bumper mounts and extensions for the shifter if I am not mistaken. I am sure the spacers will work, but the extra stuff may not.
Does anyone know if these items can me customized to fit???
|
Joey
Dodge Dakota
JOIN HERE
4/22/2003
23:30:47
| RE: 2
IP: Logged
Message:
I have the auto tranny. Im wondering if the steering extension is different between 99 and the 2002's. The bumper brackets i can fab up if need be.
|
JJ02QC
Dodge Dakota
JOIN HERE
4/23/2003
00:06:57
| RE: 2
IP: Logged
Message:
Do you need to add an extension to the steering for a 2" lift?
|
Joey
Dodge Dakota
JOIN HERE
4/23/2003
02:31:00
| RE: 2
IP: Logged
Message:
I had to on my old Ranger so I'm just assuming the dakota would need one. What else might be different between the 2?
|
Andy
Dodge Dakota
JOIN HERE
4/23/2003
08:38:29
| RE: 2
IP: Logged
Message:
I have installed the 2" PA on my '97 4x4 manual. To points points mentioned aboves:
I needed a steering extension (comes with the kit), had to drill new holes to lift the rear bumper (For the front bumper you will get mounting brackets) and weld in an extension to the 4x4 shifter...
I don't know whether the steering extension will fit newer models though.
|
conig
Dodge Dakota
JOIN HERE
4/23/2003
12:27:20
| RE: 2
IP: Logged
Message:
I'm curious as well as I'd like to get a two inch bl as opposed to a 3inch, can 33's be stuffed under a 2wd with 2inch bl and 3inch susoension?
|
newdaker
Dodge Dakota
JOIN HERE
4/25/2003
01:47:43
| RE: 2
IP: Logged
Message:
Might be a tight fit to put the 33's under there because i have a 3in bl and the 31's i have rub even trimmed but with ur extra lift u might be able 2 pull it off
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
