| From | Message |
bleu
Dodge Dakota
JOIN HERE
4/02/2003
12:12:56
|
 Subject: changing front end lift
IP: Logged
Message:
any info you guys may have would be helpful.
i have a 01 sport with a 3" body and 2" coil spacer in front running 33 m/t's i want to chage this out with the fabtech 2" basic (http://www.natltire.com/ntw0799/pages/fabtech11.html) if i am correct i will lose 1" of lift in the front, right? because the coil spacer actually lifts the front end 3"'s. am i correct on this? also, am i going to increase my downward travel once this is in?
thank you
bleu
|
goon1
Dodge Dakota
JOIN HERE
4/02/2003
12:34:21
|  RE: changing front end lift
IP: Logged
Message:
dont expect more downtravel because the lift will only force the arms further down closer to their limits
|
cong
Dodge Dakota
JOIN HERE
4/02/2003
13:48:52
|  RE: changing front end lift
IP: Logged
Message:
I doubt you would gain that much downward travel maybe 1/2 an inch. It would probable be more worth your while to get fabtechs a-arms and keep the 3inches of height you have. plus 33's with 2inch coils will probable be a pretty tight fit.
|
bleu
Dodge Dakota
JOIN HERE
4/02/2003
14:50:11
| RE: changing front end lift
IP: Logged
Message:
i can use fabtech's a-arms with stock wheels? what im lookin for is to take out some of the 'roughness' in the ride when driving-whether its on or off road.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
