From | Message |
MechanicMike Dodge Dakota JOIN HERE
3/15/2003 20:14:45
|
Subject: Hey Conig ! IP: Logged
Message: Sorry to be such a PITA with all these questions. I went to JC Witney's website and couldn't find the front coil spacers. I only found Rough Country spacers for a Dodge Ram. Are these them? How did the lift affect your ride quality? Thanks alot for answering all my annoying questions, I appreciate it.
Mike
|
NJQUAD2BY Dodge Dakota JOIN HERE
3/15/2003 20:44:36
| RE: Hey Conig ! IP: Logged
Message: Mike, you have to look under Dodge RAM for the spacers. Try this link..
http://www.jcwhitney.com/product.jhtml?CATID=161854&BQ=jcw2
I have the spacers and Fabtech add a leafs on my 2002 Quadcab. The ride's a little stiff, but worth it. I just got it aligned today. Everything checked out but the caster. It's a little off, but the said it would not cause any problems.
|
MechanicMike Dodge Dakota JOIN HERE
3/15/2003 20:49:37
| RE: Hey Conig ! IP: Logged
Message: NJQUAD2BY, thanks for the reply, I'll check it out. By the way you truck looks awsome in the other post with the lift done. Any plans on tires? I'm looking at Bridgestone Dueler Revos 275/70/16 with is like a 31x11 or so. Hope my truck comes out half as good.
Mike
|
njquad2by Dodge Dakota JOIN HERE
3/15/2003 22:13:01
| RE: Hey Conig ! IP: Logged
Message: Hey Mike,thanks for the complement. I'll probably get tires in the fall. I have to wear the GoodYears out first. I was looking at duelers today while getting my alignment. Big bucks...165 each for 265/75/16's. I'm looking at Cooper Discoverer A/T's. They are under 100 bucks for the same size.
Jay
|
conig Dodge Dakota JOIN HERE
3/16/2003 12:17:47
| RE: Hey Conig ! IP: Logged
Message: my camber was off but last time I had it aligned they got my camber perfect. the shop has to adjust both the upper and lower control arms to adjust the camber.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|