| From | Message |
Marty
Dodge Dakota
JOIN HERE
2/26/2003
11:32:58
|
 Subject: Tire Size and Trimming
IP: Logged
Message:
Just wanted some feedback from someone more knowledgeable than I am. I really like the way the 10" deep rims look on our trucks. Like QUADMAN's truck. But I've seen you guys write a bunch about how much they rub with 33's and how they are only good for road use. My truck will only see mild off-road use. Mainly up trails and the occasional muddy field. But she's my daily driver, seeing nothing but paved streets 80% of the time. Would / could we get more clearance to allow us to do the light offroading that I described above with running 32's on those 10" rims? Or do they even make 32's that size? Thanks.
Marty
'02 QC 4x4 4.7L v8 auto
|
Rob454
Dodge Dakota
JOIN HERE
2/26/2003
20:18:05
|  RE: Tire Size and Trimming
IP: Logged
Message:
10s will stick out A LOT. I ended up with stock 15x8s with 33x12.5x15 on a stock truck with minor trimming of the front air dam and the bottom corner on the inside of the back of the wheel well. they only rub slightly at full turn. if youre gonna get 15x10 32s will look funny cause they are only 11 inches wide the sidewall will be flattened out with the lip of the rim. on a 33 he sidewall is slightly bulged out. ive had no problems with those tires. Im going back to stock 31s because I use my truck for more work now than play
Rob
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
