From | Message |
highrider Dodge Dakota JOIN HERE
1/30/2003 02:21:12
|
Subject: 3 inch coil spacers! new IP: Logged
Message: http://performancelifts.com/cgi-bin/cart/PLCDR3U.html
i just found these for the ram, but hey will also fit the 2wd daks. and it is 3 inches instead of two.
|
conig Dodge Dakota JOIN HERE
1/30/2003 10:57:49
| RE: 3 inch coil spacers! new IP: Logged
Message: would definately need a set of control arms to make those work. truckin has some but I'm weary of there products.
|
WHIKOTA Dodge Dakota JOIN HERE
1/30/2003 21:00:19
| RE: 3 inch coil spacers! new IP: Logged
Message: DONT EVEN THINK ABOUT DOING THAT BRO!!!
|
highrider Dodge Dakota JOIN HERE
1/31/2003 19:34:57
| RE: 3 inch coil spacers! new IP: Logged
Message: ok man, i promise, i wont do it. but will you tell me why i SHOULDNT THINK ABOUT IT.
what is wrong with 3 inches.
|
WHIKOTA Dodge Dakota JOIN HERE
1/31/2003 22:10:29
| RE: 3 inch coil spacers! new IP: Logged
Message: theres nothing wrong with three more inches !!well ok let me rephrase what i had said before ,you shouldnt do it,unless you get new control arms,the reason being is,after 2 inches of lift you are on the verge of not being able to align your front end,at least thats what everyone,including daystar and fabtech have told me,unless you get new control arms!!
you are better off going with the fabtech 3" performance lift its a little pricy but in the long run it will be worth it!i should take my own advice,im getting 2" daystar coils instead of the fabtech lift,i had the money for the lift then an unfortanute mishap with my dak happened!!grrrrr
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|