| From | Message |
FastDak
Dodge Dakota
JOIN HERE
1/17/2003
21:08:23
|
 Subject: 2" PA Lift
IP: Logged
Message:
Hey guyz....I just recieved a 2" PA body lift for the gen II dakota. Mine is a 92 4x4 CC 5.2. Anyway, my question is, if anyone has this lift did it come with bumper brackets? Mine just has the pucks, bolts, washers, and loctite....Thanx for the help
|
DougP
Dodge Dakota
JOIN HERE
1/18/2003
02:10:09
|  RE: 2" PA Lift
IP: Logged
Message:
You got everything you need. Those instructions suck, but if you read them a couple of times and take a good look at your truck you should be able to figure it out.
The bumpers can be moved up by drilling a couple of new mounting holes in the frame. I haven't done mine yet.
Let me know if you need any help. I've been pretty happy with my lift so far.
DougP
|
FastDak
Dodge Dakota
JOIN HERE
1/18/2003
13:24:12
| RE: 2
IP: Logged
Message:
thanks alot.....so no brackets are required then? I guess thats kinda weird you obviously would have to lift your bumpers you think they would just make some brackets anywayz? ah well....
|
Andy
Dodge Dakota
JOIN HERE
1/20/2003
03:10:16
| RE: 2
IP: Logged
Message:
I installed the 2" lift on a '97... don't know if it's the same for your model, but I didn't need any brackets. I had to drill new holes as DougP writes. You need brackets only with a 3" lift...
|
Hoe
Dodge Dakota
JOIN HERE
1/20/2003
07:27:29
| RE: 2
IP: Logged
Message:
i put that on my 95 and if i remember right all i had to do was redrill holes in the front bumper and in the rear i didtn raise the bumper becasue of my reese hitch the worst part is the fan will want to hit the transmission lines i thought i had that problem solved and then a few weeks ago it started rubbing again so i'm fixing it for good this time
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
