| From | Message |
jeff smith
Dodge Dakota
JOIN HERE
1/12/2003
13:43:40
|
 Subject: tires with a 2' body lift
IP: Logged
Message:
My name is jeff and first of all i would just like to say thank you to all the people who helped me in my time of need. This site is kick ass and a cool place to hang out an get info. Now about my tires. I have a 1996 dak with a 2' body lift from performance accesories. How big of tires can i fit under my rig with them being functional but also not looking too big. Also how wide are my stock rims. I think they are 11.50 but i'm not shure.
Thanks a million
SMITTY
|
Hoe
Dodge Dakota
JOIN HERE
1/13/2003
07:16:46
|  RE: tires with a 2' body lift
IP: Logged
Message:
i got the 2" on my 95 and i can only run 31 bfg mud terrains but i have offset rims and i hear with the stock rims you can go with 32's i think .the stock rims arent 11.50's they are more like 7 or 8 " not exactly sure though but i think their 15x7
|
fubar1
Dodge Dakota
JOIN HERE
1/13/2003
22:18:00
| RE: tires with a 2' body lift
IP: Logged
Message:
Are your rims the 5 spoke ones with the
plastic covers over the lug nuts.
If so they are 15 inch dia. by 7 inch wide.
|
greg
Dodge Dakota
JOIN HERE
1/14/2003
18:58:37
| RE: tires with a 2' body lift
IP: Logged
Message:
hey whats up man. i just put a 2 inch body lift on my 96 too. i was wondering if you have a hard time putting you truck into 4 wheel low now. i just picked up my truck and theres not enough room for it to stay in 4 wheel low. any idea man?
|
jeff smith
Dodge Dakota
JOIN HERE
1/14/2003
22:00:52
| RE: tires with a 2' body lift
IP: Logged
Message:
yes i had a little trouble with that. You are probaly gonna have to take the shifter out and have a extention welded in. I havent really tried to get the truck into 4 wheel low but i will check and let you know.
ps i found some clear corners and side headlight reflectors for our year. Just thought you might be intrested.
|
Andy
Dodge Dakota
JOIN HERE
1/16/2003
11:51:54
| RE: tires with a 2' body lift
IP: Logged
Message:
greg: I have a '97 with a 2" PA lift installed. I tried to adjust my 4x4 lever at the linkage to the transmission, but it popped either out of 2H or 4L. I had to take the boot off until I welded the extension in. I also read that some people extended the lever by using extension nuts and all-threads...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
