From | Message |
92 dak Dodge Dakota JOIN HERE
12/30/2002 19:45:17
|
Subject: Gen II body Lift IP: Logged
Message: I have a 92 4x4 CC 318 dak. And my question is with a 3" body lift can you fit 33X10.50's under it? Or what is the biggest tire size you can put under it with the body lift? I understand that you would more than likely have to crank up the torsion bars.
|
moparguy Dodge Dakota JOIN HERE
12/30/2002 21:33:35
| RE: Gen II body Lift IP: Logged
Message: I have a 92 4x4 v8-you can only put a max 2 inch
body lift due to the radiator fan and lower hose clearance.I run32x11.50x15 on american racing 15x8's with minor rubbing on a sharp turn off road.
|
92 Dak Dodge Dakota JOIN HERE
12/31/2002 13:31:10
| RE: Gen II body Lift IP: Logged
Message: I have read in forms that people have put a 3" in with a v8? So how did they get around this problem?
Thanx
|
moparguy Dodge Dakota JOIN HERE
12/31/2002 20:42:39
| RE: Gen II body Lift IP: Logged
Message: Well, you can probably get around it by replacing the stock fan with a smaller diameter one,but i live
in Florida and it gets too hot here,because you
will lose some cooling capacity.I honestly dont think you're gonna get 33"s on with a 3" as
opposed to a 2" lift.The problem areas are the rear lower corner of the front wheelwells.Mine are
trimmed and still occasionally touch.Also,the 33's are gonna really bog down the 318 unless you plan a gear ratio swap ($$$). I may be able to email you some photos of mine w/the 32's...
|
moparguy Dodge Dakota JOIN HERE
12/31/2002 20:44:24
| RE: Gen II body Lift IP: Logged
Message: Oh, by the way, these others with the 3",are you sure they arent talking about 1997+ ??
|
92 Dak Dodge Dakota JOIN HERE
1/05/2003 15:08:16
| RE: Gen II body Lift IP: Logged
Message: Ya Im Pretty sure they were still before 97. If you could send me some pictures I would appreciate it alot.....thanx for the help. Did you not put your torsion bars up any?
amputate_acrobats@yahoo.com
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|