| From | Message |
Tom
Dodge Dakota
JOIN HERE
12/24/2002
19:31:36
|
 Subject: Finished pictures of bumper...
IP: Logged
Message:
Hello all-
Check it out. Got it back from the powdercoater today!!
Let me know if you like, and if there is any interest in ordering one!
http://www.4wheelair.com/tombuban/bumper.htm
Thanks
Tom
|
2THEXTRM
GenIII
12/24/2002
23:48:04
| RE: Finished pictures of bumper...
IP: Logged
Message:
Looks awesome, some questions: How much does that weigh in at without winch? I am concerned about my poor torsion bars getting killed:) Can u make one that will not be utilizing a winch? What driving lights are u using in the bumper? Do they come with? How bout cutting round openings to utilize the factory driving lamps for those that have them or upgraded to 4" Pilots or Piaa's? Can u add mounts/tabs for extra off-road lamps similar to pre-runner or brush guard kits? I can see from your workmanship the previous questions are not can u, but will u and how much will it effect the final cost, lol. Thanks for the response.
Flowmaster cat back w/15 inch chrome tip, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
3 inch body/1.5 inch Block Lift, 305 70-16 X-Terrains on AR Terons, Pro Comp ES9000's
Grizzly double/single rollbar with (6) Hella's, Manik Nerfs, Line-X, Hard Work & $$$$$$$$$$
|
Tom
Dodge Dakota
JOIN HERE
12/25/2002
08:07:29
|  RE: Finished pictures of bumper...
IP: Logged
Message:
Ok hope you are sitting down....The bumper weights in at 130 lbs. just about any light can be added, but can't be any bigger than 4". So you can still use the factory driving lights! Any tab you want can be added, as for extra cost, depends...if you want a bullbar for the lights, or just tabs. The tabs would be very little, maybe $10-20.
It can be made with out the winch in mind, this will drop the weight down to maybe 100lbs.
Hope this helps
Tom
|
kerratt
Dodge Dakota
JOIN HERE
12/29/2002
22:52:49
| RE: Finished pictures of bumper...
IP: Logged
Message:
Nice Rig!
How much $$$$ and what equipment was used to do the straight axle conversion?
|
Tom
Dodge Dakota
JOIN HERE
12/30/2002
17:27:29
| RE: Finished pictures of bumper...
IP: Logged
Message:
What do you mean how much???? Look at the other tread on my straight axle. Listed there.
|
Jason
Dodge Dakota
JOIN HERE
1/21/2003
14:37:24
| RE: Finished pictures of bumper...
IP: Logged
Message:
Yes i'm curious also, how much? And is there a way you can put brushguard bars on the bumper.
|
Jeff
Dodge Dakota
JOIN HERE
1/21/2003
23:15:04
| RE: Finished pictures of bumper...
IP: Logged
Message:
Dude nice BUMPER. Lots of talent there. How much for the bumper with a bull light bar on top, no winch mount, the tow hooks have to stay, and the bull bar has to except KC Daylighters, 6" round. My truck is stock, so I will not need the same height.
Just square the bumper off where you have the 45 degree bend just below the tow hooks. Save material and costs. My truck is a 2000 Dakota Sport. Just an idea for a price. Thanks.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
