| From | Message |
kevan
Dodge Dakota
JOIN HERE
9/15/2003
23:23:47
|
 Subject: RE: Replace Wheel Bearings
IP: Logged
Message:
i have a question.. i have a 66 impala and i am trying to replace the bearings on the front drivers side.. i get the pin out and the hub nut off but i cant get the hub off because the brakes are so damn tight on it that its harder than heck... waht should i do to get it off and fix this problem? please help!!!!
kevan
|
chaximus
Dodge Dakota
JOIN HERE
9/15/2003
23:38:20
| RE: Replace Wheel Bearings
IP: Logged
Message:
take off the brakes :)
that should happen before the hub comes off i believe.
|
Horsepowerguy
Dodge Dakota
JOIN HERE
12/17/2006
21:10:43
| RE: Replace Wheel Bearings
IP: Logged
Message:
i have a 1993 4x4 dak and a 96 2wd dak, just wonderin if anyone knows if i can just put a wheel bearing and hub assebly/rotors off a 1990 or older to swap my front end ver to 5 on 4.5 bolt pattern, i know i can just swap out the axles in the rear just not sure about ht efront, i havent had a chance to cross reference teh bearings to see if they are the same from one year to the next, all i know is i refuse to buy adapters
|
jonathan
Dodge Dakota
JOIN HERE
3/23/2008
02:20:55
| RE: Replace Wheel Bearings
IP: Logged
Message:
pep boys now has the hub assemblies for $89.99 with out the sensor $159 if you need the anti lock brake sensor. and its easy to do at home with the right tools.
|
| | <<Oringinal Post <<Previous Page P 3 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
