| From | Message |
jeremy miller
Dodge Dakota
JOIN HERE
1/03/2004
21:16:25
|
 Subject: need estimated times
IP: Logged
Message:
sorry guys after paying off my 03 cc r/t when i sold my old house two months ago i reavaluated the 4k i dumped into the truck that kept me in the mid 14's so i traded for a srt-4 do you have any estimated or seen a 1/4 mile time for these cars?
|
fatmat789
Dodge Dakota
JOIN HERE
1/03/2004
22:15:47
|  RE: need estimated times
IP: Logged
Message:
i'm pretty sure they run anywhere from 13.9-14.5, not positive though
anyways, $4k? you could've dont better than 14's with that N/A:
-M1 2bbl intake manifold $400
-F&B 52mm TB $475
-Spintech 2.5" true duals, no cats $585
-GSM headers $635
-B&G flash $430
-Harland sharp 1.7 rockers $300
-K&N FIPK $250
that right there will get you into 13's spending $3075, you just gotta buy the right parts
and if you wanted 12's (75 shot) or low 12's (100 shot), add a Nitrous Express Kit for $450 & a the upgrade kit for $250 more, that still leaves you $225 to buy other stuff....
but its too late to tell ya that, you already got a new car. atleast you got something good
|
4 cyl suck
Dodge Dakota
JOIN HERE
1/03/2004
23:40:16
| RE: need estimated times
IP: Logged
Message:
4 bangers suck, but since you bought one i will tell you that Dodge says these little cars will run a 13.2 with perfect conditions. I'm guessing they mean someone who can drive behind the wheel, good traction, and good weather conditions.
|
fatmat789
Dodge Dakota
JOIN HERE
1/04/2004
10:19:48
| RE: need estimated times
IP: Logged
Message:
I dont like 4 bangers, but atleast he got a Dodge. theres only 1 local SRT-4 here where i live and all i got to say is "DAMN". they are quick. but jeremy, do u like the seats in them? since you've owned both an R/T and an SRT-4, do you think the seats in the SRT-4 will fit in an R/T??
|
gen1dak
Dodge Dakota
JOIN HERE
1/04/2004
10:54:25
| RE: need estimated times
IP: Logged
Message:
13.2 my ass. Is there no limit to marketing hype? Ideal conditions do not exist, so go for the real-world results. Pulling one wheel, they manage 13.90's. The '94's will benefit from what will be a standard piece then, but can be added to earlier models...the Quaife limited slip diff.
|
jeremy miller
Dodge Dakota
JOIN HERE
1/04/2004
13:03:29
| RE: need estimated times
IP: Logged
Message:
mine is an 04 model and i got the top of the lin model every option,as wellas i believe i have a limited slip which was availible this year, as for the seats they say they are basically a srt-10 viper seat that has been shrunk a tad. but they are a decent size seat.i think with a few mods they would fit. i put racing seats in the r/t before i sold it salesman said they were universal...MY ASS!!! I HEARD MID TO HIGH 13'S. I LIVE IN MD AND THIS SPRING ILL BE AT CECIL COUNTY DRAGWAY REALLY CLOSE 300' ABOVE SEA LEVEL I THINK AND THEY SAY YOU PICK UP 3 TENTHS AT THAT TRACK ALONE.
|
IntenseDak39
*GenIII*
1/04/2004
13:05:57
| RE: need estimated times
IP: Logged
Message:
i have seen 03' pull 13.7-13.9s so i imagine the addition of the limited slip and more power should pull a little further down the scale.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
