| From | Message |
Frog
Dodge Dakota
JOIN HERE
8/13/2003
22:00:45
|
 Subject: Parts for Sale
IP: Logged
Message:
All of these parts came of a 98 dodge dakota 2wd RC. If you are interested in the parts, please contat me at ccieguru@sbcglobal.net
Here we go Mopar PCM
ASP under drive pulleys
M-1 intake with install kit
52 MM Holley TB
53 MM Hughes Engines TB
2.02 R/T heads with full port, polish, serdi valve job and all. Flow is 300 at .510 lift. that is all I know.
flow kooler water pump (just put it on)
gibson headers and catback exhaust
4 pirelli scorpion zero 275/55/17's (500-700 miles on them)
MSD 6a ignition
MSD ss blaster coil
autometer air fuel gauge
autometer 2 pod pillar
4.10 oem gears and trac-lok (500 miles)
2400 stall from Martin Saine (500 miles)
bellteh 2" 4" drop kit with nitro active shocks all around
split second box
clear corners
euro tail lamps
sir michaels rollpan ( red )
B&M truck floor shifter still in the box ( brand new )
stage III intense performance cold air intake w/canister
stillen crossed drilled and slotted front rotors
I think that is about it. I also have all the parts that were removed too put these in place ie "stock". I will also be willin to part with the engine (which has 60,000 miles on it, and very strong), and anything else on the truck you want.
It was fun while it lasted!
FROG
|
SolOcr33p
Dodge Dakota
JOIN HERE
8/13/2003
22:45:52
|  RE: Parts for Sale
IP: Logged
Message:
How much for the TB?
|
Frog
Dodge Dakota
JOIN HERE
8/14/2003
00:36:23
| RE: Parts for Sale
IP: Logged
Message:
Which one?
Holley 52mm
Stock
Hughes 53mm
|
unholy1
Dodge Dakota
JOIN HERE
8/14/2003
00:51:38
| RE: Parts for Sale
IP: Logged
Message:
How much for the headers. Are they stainless or chrome? What size engine did these come off of?
|
jsst
Dodge Dakota
JOIN HERE
8/14/2003
01:19:27
|  RE: Parts for Sale
IP: Logged
Message:
How much for the 4 pirelli scorpion zero 275/55/17's. Could you tell me the hieght of the tires. I have to get tires next month and was looking at 275-50-17's at 28" tall. Also where you are located so Icould figure out shipping fees, I'm in Ft. Myers,FL. Please reply my tires are so worn I cant figure out what the tread design looked like. Thanks!
|
jsst
Dodge Dakota
JOIN HERE
8/14/2003
01:29:04
| RE: Parts for Sale
IP: Logged
Message:
Tried to e-mail, could'nt get to it. Heres mine Jhancock650@earthlink.net. Thanks!
|
VicS
Dodge Dakota
JOIN HERE
8/14/2003
01:53:38
| RE: Parts for Sale
IP: Logged
Message:
Am interested in the MSD ignition and coil if they will work on my'03 Dakota w/4.7 and 5 sp auto trans.
|
adam
Dodge Dakota
JOIN HERE
8/14/2003
02:11:07
| RE: Parts for Sale
IP: Logged
Message:
im pretty much interested in everything, can u send me the prices or post them here. my email is adam69in2000@yahoo.com
|
dweishaar
GenIII
8/14/2003
06:04:13
|  RE: Parts for Sale
IP: Logged
Message:
VicS are you serious? or do you not know much about your engine? As for me prices on the MSD stuff the 52mm TB and M-1 please.....oh 202 Heads as well.
The Baja Dak
|
SolOcr33p
Dodge Dakota
JOIN HERE
8/14/2003
07:31:23
| RE: Parts for Sale
IP: Logged
Message:
53mm hughes
jtromble@tampabay.rr.com
|
Demon
Dodge Dakota
JOIN HERE
8/14/2003
08:01:09
| RE: Parts for Sale
IP: Logged
Message:
How much for the drop kit, roll pan and rotors?
|
frog
Dodge Dakota
JOIN HERE
8/15/2003
09:02:55
| RE: Parts for Sale
IP: Logged
Message:
Here are the prices, and the more you want the cheaper I go. Most everything on the list was bought this year. A lot of it was purchased and installed in the last 3 months.
Mopar PCM $225
ASP under drive pulleys $60
M-1 intake with install kit $250
52 MM Holley TB $275
53 MM Hughes Engines TB $200
2.02 R/T heads with full port, polish, serdi valve job and all. Flow is 300 at .510 lift. that is all I know. $1200 ( I raised the price a little because of how much I have invested. I can get flow #'s if you want)
1.7 RR's (Mopar) $300
flow kooler water pump (just put it on) $50
gibson headers (Chrome) and catback exhaust $150 ea
4 pirelli scorpion zero 275/55/17's (500-700 miles on them) $400
MSD 6a ignition $75
MSD ss blaster coil $30
autometer air fuel gauge $35
autometer 2 pod pillar $25
4.10 oem gears and trac-lok (500 miles) $275
2400 stall from Martin Saine (500 miles) $200
bellteh 2" 4" drop kit with nitro active shocks all around $400
split second box $$125
clear corners $50
euro tail lamps $100
sir michaels rollpan ( red ) $100
B&M truck floor shifter still in the box ( brand new ) $100
stage III intense performance cold air intake w/canister $200
stillen crossed drilled and slotted front rotors $150
The truck only had 62000 miles on it.
Once again. These parts came off of a 98 Red Dakota RC 318. If you have all the stuff from this list. You will see roughly 290RWHP and 297RWTQ
Thanks,
|
jsst
Dodge Dakota
JOIN HERE
8/20/2003
00:06:17
| RE: Parts for Sale
IP: Logged
Message:
I would like to buy the tires, but your email address will not come up. Please email me at jhancock650@earthlink.net. Need new rubbers, I'm running on steelbelts.
|
kota on 20s
GenIII
8/20/2003
18:25:58
| RE: Parts for Sale
IP: Logged
Message:
what happend? selling the truck?
~Eric
Single cam, non-VTEC
|
frog
Dodge Dakota
JOIN HERE
8/22/2003
12:50:00
| RE: Parts for Sale
IP: Logged
Message:
I hit a curb and tweaked the rearend a little, but the frame got shifted and AAA said it was totaled.
Frog
|
FastBlackDak
Dodge Dakota
JOIN HERE
8/22/2003
13:32:28
| RE: Parts for Sale
IP: Logged
Message:
i want the m-1 shoot me an e-mail and i'll get you a money order in the mail.
|
akaproph
Dodge Dakota
JOIN HERE
8/22/2003
14:55:29
| RE: Parts for Sale
IP: Logged
Message:
How fast were you going?
|
Buzz
Dodge Dakota
JOIN HERE
8/22/2003
18:08:34
| RE: Parts for Sale
IP: Logged
Message:
Which B&M shifter is it? Hammer etc. Hit me up, i'm looking for one right now...
william.evans@rxsol.com
|
Frog
Dodge Dakota
JOIN HERE
8/22/2003
19:44:12
| RE: Parts for Sale
IP: Logged
Message:
35 MPH
B&M light weight truck shifter
I will have truck back on Wednesday
|
Buzz
Dodge Dakota
JOIN HERE
8/22/2003
19:50:25
| RE: Parts for Sale
IP: Logged
Message:
got that... which one... does it have a name.. hammer, star, megashifter??? can you post a part #
|
Frog
Dodge Dakota
JOIN HERE
8/23/2003
17:39:58
| RE: Parts for Sale
IP: Logged
Message:
megashifter part# 80680. I will also throw in a second polished handle with nitrous button.
|
Buzz
Dodge Dakota
JOIN HERE
8/23/2003
18:43:09
| RE: Parts for Sale
IP: Logged
Message:
it includes the cable's right... if it's complete I will take it.
... email me and we will figure out payment etc.
william.evans@rxsol.com
where are you located?
|
ryan
Dodge Dakota
JOIN HERE
8/23/2003
23:50:59
| RE: Parts for Sale
IP: Logged
Message:
i'll take the stock tb if you still have it. my email is r_infante@hotmail.com
|
Zman
Dodge Dakota
JOIN HERE
8/25/2003
10:33:07
| RE: Parts for Sale
IP: Logged
Message:
I'm interested in the R/T heads, M-1 intake, 52mm Holley TB, and the mopar PCM. Send me an email on how much. Thanks. Sorry to hear about the truck.
|
sprttrk
Dodge Dakota
JOIN HERE
8/25/2003
15:21:02
| RE: Parts for Sale
IP: Logged
Message:
i will take the under drive pullies from you and the fan clutch if you are selling it. tell me a price. thankx also if it is totaled how about the front dash.
|
94dakotaR/T
Dodge Dakota
JOIN HERE
8/25/2003
16:59:51
| RE: Parts for Sale
IP: Logged
Message:
consider your Martine Saine torque converter sold!! PLease e-mial me at sobored69@hotmail.com to discuss shipping!! Thanks!!! mike
|
| | P 1 Next Page>> |
