| From | Message |
VetteGC
Dodge Dakota
JOIN HERE
7/30/2003
02:16:55
|
 Subject: What mods do I need?
IP: Logged
Message:
I have a 2002 patriot blue 4.7L 5sp RC. I just slapped on the mbrp cuda style exhaust and intense performance stage 3 cold air intake. What should I do next? After a little searching on this board, a throttle body seems like a good step? Any sugestions? Never been to the track but I would love to eventually hit low 14's or even high 13's! Has anyone dynoed either of these mods? Oh, I also replaced 3rd cat with straight pipe.
|
Ryan
Dodge Dakota
JOIN HERE
7/30/2003
02:39:17
| RE: What mods do I need?
IP: Logged
Message:
I would defenitely go with a new TB. Maybe a higher gear ratio is what your looking for also. Check out my website.
v8Performance.com - Dodge Performance Products
|
NavyDak
Dodge Dakota
JOIN HERE
7/30/2003
02:59:32
| RE: What mods do I need?
IP: Logged
Message:
KRC 206 cams
www.krcperformance.com
|
Tracy H
Dodge Dakota
JOIN HERE
7/30/2003
13:32:37
| RE: What mods do I need?
IP: Logged
Message:
Jeep HO Cams for better low end torque and Jeep HO intake if you want high end performance and plan to race it. Both can be found at www.buymopar.com. Fastman TBs are a popular choice and I have ordered mine a week and a half ago, but have yet to receive it. They can be found at www.thefastman.com.
~Tracy
'00 4x4 SLT QC 4.7 Auto 3.55LSD *My Dak Pics*
3" PA Body Lift, BFG AT 33x12.5x15 on AE 15x8 149's, Cranked Torsion Bars, Gibson Dual Rear Stainless Catback, H.O. Cams, Stainless K&N Clone Intake, TPS @.78v, Relocated IAT, Powerslot Rotors & Hawk Pads, Autolite 3923's & Stant 180° T-stat, ProComp ES-9000 Shocks, Clear Corners, T-Rex Stainless Nerf Bars ...
Mods to be installed: Fastman 68mm TB, 4.10 gears
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
