| From | Message |
FROG
Dodge Dakota
JOIN HERE
7/11/2003
15:42:22
|
 Subject: TQ-Converter
IP: Logged
Message:
I just wanted to know what the consequences of running a big cam that pulls from 2600 up 6000, and not having TQ-Converter to go with it. I have seen KRC performance that he pretty much recommends a TQ-Converter for all the cams he specs out.
Thanks for any info,
FROG
|
big_torque
Dodge Dakota
JOIN HERE
7/11/2003
18:03:38
|  RE: TQ-Converter
IP: Logged
Message:
I just did a heads(2.02 ported magnum) and cam (218/224) combo on mine and the consequences are your low end will be GONE. You can drive it with the stock converter no problems but its a DOG until 3000+ rpm. I still have the stock converter and it sux. Need that stall to get into the powerband quicker.
hope this helps
|
blowndakrt
Dodge Dakota
JOIN HERE
7/11/2003
18:32:57
| RE: TQ-Converter
IP: Logged
Message:
go atleast 2400 stall and 4.10 gears on a dak with 28" tires... you could go 3000 stall but daily drivability will suffer.
|
big_torque
Dodge Dakota
JOIN HERE
7/12/2003
07:06:53
| RE: TQ-Converter
IP: Logged
Message:
I got the MSaine 2800 stall , but it isnt doing much good sitting on my workbench.
|
FROG
Dodge Dakota
JOIN HERE
7/12/2003
19:18:18
| RE: TQ-Converter
IP: Logged
Message:
I ordered mine from MSaine and I went to have it installed and found out I got the wrong one and now my truck is out of comission until atleast tuesday or wednesday. I got one for a 518 instead of 500.
FROG,
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
