| From | Message |
RTINAZ
Dodge Dakota
JOIN HERE
7/11/2003
11:44:37
|
 Subject: BRAKE PADS
IP: Logged
Message:
I am about to change out the brake pads on my 99 rt cc and I was wondering how easy of a job this is.... doesnt look hard....any input?
|
JasonB
Dodge Dakota
JOIN HERE
7/11/2003
13:13:52
| RE: BRAKE PADS
IP: Logged
Message:
Nope...it's not hard. No pearls of wisdom needed for that one.
|
pete
Dodge Dakota
JOIN HERE
7/11/2003
15:17:28
| RE: BRAKE PADS
IP: Logged
Message:
its the easiest thing in the world.. BUT REMEMBER this:
DO NOT TORQUE DOWN the bolts that your caliper slides on too much, i stripped out BOTH holes on the pass side of my r/t. tapped new holes, used new bolts, but had to wrap the new bolts with electrical tape to make the diameter bigger so the pads didnt drag. im too cheap to buy new spindles. the metal is VERY soft on them, so watch out for that... other than that, its an easy job.
|
heyAZ
Dodge Dakota
JOIN HERE
7/11/2003
16:52:15
| RE: BRAKE PADS
IP: Logged
Message:
it is pretty EASY! self explainitory
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
