| From | Message |
Daksport
Dodge Dakota
JOIN HERE
5/20/2003
00:09:11
|
 Subject: Anyone with a V6 and a 9.25 rear end?
IP: Logged
Message:
Just wondering if its possible since i have a chance to get one with 3.92s with track lot.
Thanks
|
Daksport
Dodge Dakota
JOIN HERE
5/20/2003
00:13:37
| RE: Anyone with a V6 and a 9.25 rear end?
IP: Logged
Message:
track lock
Thanks
|
Timberwolf
GenIII
5/20/2003
19:05:14
| RE: Anyone with a V6 and a 9.25 rear end?
IP: Logged
Message:
Don't think they made any that way from the Factory, so anyone who does would have to have put it on themselves.
"I'd rather be fishing"
|
Daniel D
Dodge Dakota
JOIN HERE
5/20/2003
20:00:02
| RE: Anyone with a V6 and a 9.25 rear end?
IP: Logged
Message:
uh if you want to go ahead. yes the dakotas come with 9.25 from factory, it's just they don't because the extra strength is not needed. yes you can put the 9.23 rear end in your dak. it should bolt right in.
Daniel D
|
Daniel D
Dodge Dakota
JOIN HERE
5/20/2003
20:01:59
| RE: Anyone with a V6 and a 9.25 rear end?
IP: Logged
Message:
make sure the rear end is out of a dakota and not a ram.
|
Daksport
Dodge Dakota
JOIN HERE
5/20/2003
20:45:07
| RE: Anyone with a V6 and a 9.25 rear end?
IP: Logged
Message:
k thanks for the info. Im also hearing that i might need the driveshaft as the 3.9s and 5.9s have different trannys.
Thanks
|
Timberwolf
GenIII
5/21/2003
16:20:56
| RE: Anyone with a V6 and a 9.25 rear end?
IP: Logged
Message:
Thread Title: "Anyone with a V6 and a 9.25 rear end?" Are you sure about that Dan. I heard they only put them in V8's.
"I'd rather be fishing"
|
Daniel D
Dodge Dakota
JOIN HERE
5/21/2003
20:07:30
| RE: Anyone with a V6 and a 9.25 rear end?
IP: Logged
Message:
the 9.25 don't come behind a v6 because they don't need a strong axle since the v6 doesn't put out that much power. the motor size doesn't effect the rear end. so yes a 9.25 can be put in a v6 truck with little or no trouble since the v8 dakotas come with them. and they don't change that much between a v6 and v8. i don't think you'd have to change driveshafts. your stock one should bolt on just fine. your not changing transmissions. the only difference would be the size of the yoke. that' i'm not sure about. In my opinion i'd spend the money to have gears put in your 8 1/4. That's what i did and mine is holding just fine. I also put a v8 in my truck. i blew the v6 up.
Daniel D
http://www.domesticdisturbancela.com
|
Timberwolf
GenIII
5/22/2003
19:09:21
| RE: Anyone with a V6 and a 9.25 rear end?
IP: Logged
Message:
OK, I misunderstood your point. I thought you were trying to tell him that there were factory V6's with 9.25. I agree with you that the 8.25 with gears would be sufficient and also much cheaper. I have the 8.25 in mine and it has been fine in with a V8, 56,000 and counting.
"I'd rather be fishing"
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
