| From | Message |
Toilet
Dodge Dakota
JOIN HERE
5/18/2003
14:00:24
|
 Subject: Performance.......in the ghetto
IP: Logged
Message:
Well not realy....the junk yard.
From what iv read the 92-93 318 exhaust manifolds flow good. Would these work on a 94+?? Also does it matter what vehicle they come out of?
Also I was thinkin about trying some throttle body porting. Do the 94+ 5.2&5.9 use the same TB? Dont wanna ruin the one im currently using if I mess up.
Switch to electric fan, one found on taurus and other firds. Flows more than a blackmagic. Info here-
http://www.pirate4x4.com/forum/showthread.php?s=&threadid=120931&perpage=25&pagenumber=1
|
ben rollins
Dodge Dakota
JOIN HERE
5/18/2003
15:38:30
| RE: Performance.......in the ghetto
IP: Logged
Message:
get a job.
|
donny k
Dodge Dakota
JOIN HERE
5/18/2003
15:40:01
| RE: Performance.......in the ghetto
IP: Logged
Message:
i agree, get a job u punk
|
big baLLS QX
Dodge Dakota
JOIN HERE
5/18/2003
15:41:42
| RE: Performance.......in the ghetto
IP: Logged
Message:
wtf u stupid bastard. u cheap a$$ mofo. buy some aftermarket headers
|
babybackribs
Dodge Dakota
JOIN HERE
5/18/2003
15:42:34
| RE: Performance.......in the ghetto
IP: Logged
Message:
u will mess it up b/c u dont know how to do jack shiit
|
mike jurkins
Dodge Dakota
JOIN HERE
5/18/2003
15:43:57
| RE: Performance.......in the ghetto
IP: Logged
Message:
u should throw a match in your gas tank u lil freak
|
dominic
Dodge Dakota
JOIN HERE
5/18/2003
15:44:35
| RE: Performance.......in the ghetto
IP: Logged
Message:
ur trucks crap toilet boy. are u a troll?
|
kyle lang
Dodge Dakota
JOIN HERE
5/18/2003
15:45:18
| RE: Performance.......in the ghetto
IP: Logged
Message:
honestly. whats wrong with you man?? u should show this forum some respect.
|
BBD
Dodge Dakota
JOIN HERE
5/18/2003
15:45:57
| RE: Performance.......in the ghetto
IP: Logged
Message:
hay toilet, what are you, some kind of idiot?
|
rollin
Dodge Dakota
JOIN HERE
5/18/2003
15:53:21
|  RE: Performance.......in the ghetto
IP: Logged
Message:
ON A ROLL THERE TROLL >>>>>>>>>>>>>>>>>
|
ken jacos
Dodge Dakota
JOIN HERE
5/18/2003
18:03:41
| RE: Performance.......in the ghetto
IP: Logged
Message:
hey rollin ,how bout i punch u in the gut
|
rollin
Dodge Dakota
JOIN HERE
5/18/2003
18:15:05
| RE: Performance.......in the ghetto
IP: Logged
Message:
Why ?
|
Mike N
Dodge Dakota
JOIN HERE
5/18/2003
19:52:27
| RE: Performance.......in the ghetto
IP: Logged
Message:
Would it be so hard to answer the kids question? Yes, you can use '92 and all initial production '93 Magnum exaust manifolds Part# 53006618 passenger side and #53006617 drivers side. The inlet diameter is larger (2 1/8") compared to 1 7/8" on later years. As far as the TB goes, I believe both v8's shared the same one and the v6 TB was smaller.By the way, the exaust manifold swap is only worth 10 horsepower, so its up to you if you want to swap cast iron for cast iron for such a minimal gain.
|
Mike N
Dodge Dakota
JOIN HERE
5/18/2003
20:00:52
| RE: Performance.......in the ghetto
IP: Logged
Message:
One more thing, don't forget to get the '92 Y-pipe so that you can hook these manifolds up.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
