| From | Message |
1999Dakota
Dodge Dakota
JOIN HERE
2/06/2003
15:45:10
|
 Subject: Fel-Pro gaskets
IP: Logged
Message:
Does anyone know what Fel-Pro model #'s are for the BellyPan Gasket and the Intake Flange Gasket? I also need 15 new bolts for the intake. Who makes the best ones? Any pointers would be appreciated. I have a 1999 Dakota w/ 5.2L
http://www.rj3.net/~nick/
|
b1llyw
DakotaEnthusiast
2/06/2003
15:48:35
|  RE: Fel-Pro gaskets
IP: Logged
Message:
Fel-Pro makes the Mopar Performance gaskets, and the bolts are included with that package. P4876049. $24.82 for the package from these folks:
http://www.trademotion.com/partlocator/index.cfm?siteid=213794
Bill White
2002 QC 4x4, SLT , 4.7, 5 spd, 3.92 LSD
1995 CC 4x2, SLT, 318, 5 spd, 3.55 LSD
|
1999Dakota
Dodge Dakota
JOIN HERE
2/06/2003
15:59:56
| RE: Fel-Pro gaskets
IP: Logged
Message:
Any idea how these hold up compared to the others on the market? I was told that the stock Mopar gaskets are pretty cheaply made. I haven't had the intake off yet so I don't know. I take it that the Mopar Performance stuff is a lot better quality? I really want to put on the M1 but in MASS we have those damn Calif. Emmisions laws. No room for any fun anymore! How are the Mr. Gasket Brand or Napa Gaskets??? I want the best I can get and hopefully(knock on wood) It won't let out on me again.
http://www.rj3.net/~nick/
1999 Slt 4x4 Red/Red, 5 speed w/3.92's,31x10.5x15 Mickeys w/ 15x8 Centerline Hellcats, Msd 6AL, Msd super... Wires, Msd Blaster SS Coil, Jet Stage 2, K/N Gen II
|
b1llyw
DakotaEnthusiast
2/06/2003
16:23:14
| RE: Fel-Pro gaskets
IP: Logged
Message:
I feel completely comfortable with the Mopar Performance gaskets. I ran them on my old 408 with a blower and had no problems. I'm running them on my new 408 for my '95. For an intake gasket, they're as good as anything.
Bill White
2002 QC 4x4, SLT , 4.7, 5 spd, 3.92 LSD
1995 CC 4x2, SLT, 318, 5 spd, 3.55 LSD
|
kc8lbn
GenII
2/07/2003
14:26:06
| RE: Fel-Pro gaskets
IP: Logged
Message:
The felpro kit from my local autozone had cork manifold end gaskets, the kit from mopar contained the new tin bellypan gasket, rubber end seals and bolts for intake. I also used mopar gasket sealant on everything, This new spray sh!t works wonders. p/n 04318035
|
1999Dakota
Dodge Dakota
JOIN HERE
2/11/2003
16:03:53
| RE: Fel-Pro gaskets
IP: Logged
Message:
Would you reccomend using the spray sh_t with the gasket or just use the gasket alone. Where did you put the spay gasket on your motor? Curious to know were you reccomend puting it?
http://www.rj3.net/~nick/
1999 Slt 4x4 Red/Red, 5 speed w/3.92's,31x10.5x15 Mickeys w/ 15x8 Centerline Hellcats, Msd 6AL, Msd super... Wires, Msd Blaster SS Coil, Jet Stage 2, K/N Gen II
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
