| From | Message |
Cal Dak
Dodge Dakota
JOIN HERE
2/01/2003
21:18:47
|
 Subject: Quick HP & Torque Q
IP: Logged
Message:
In your opinions how much HP & Torque do you think I will have by adding these mods to my STOCK V6:
Flowmaster 50 magnaflow dual out(with 2.25 in. pipes-already put on), Volant air intake, ASP crank pulley, 180 degree thermostat and V8 TB.
I was hoping to get a total of 205 HP, and 235 Torque.
Any guesses are very appreciated.
|
big_torque
Dodge Dakota
JOIN HERE
2/01/2003
21:46:27
| RE: Quick HP & Torque Q
IP: Logged
Message:
I guess about 20 HP.
|
Buddy Jones
Dodge Dakota
JOIN HERE
2/01/2003
22:05:41
| RE: Quick HP & Torque Q
IP: Logged
Message:
180 horsepower and 220 lbs.-ft. torque at the wheels.
|
Cal Dak
Dodge Dakota
JOIN HERE
2/01/2003
22:55:54
| RE: Quick HP & Torque Q
IP: Logged
Message:
I am not too worried about increases in HP, I just want the Torque, that way i can at least look fast from light to light - faster take offs.
Any other guesses?
|
Buddy Jones
Dodge Dakota
JOIN HERE
2/01/2003
23:26:01
| RE: Quick HP & Torque Q
IP: Logged
Message:
If it makes you feel any better 220 torque at the wheels is close to 275 at the crank.
|
Cal Dak
Dodge Dakota
JOIN HERE
2/01/2003
23:29:08
| RE: Quick HP & Torque Q
IP: Logged
Message:
i know but i was talking about at the crank, cause for my V6 it has 190 stock, plus those mods, is what i was getting at
|
Cal Dak
Dodge Dakota
JOIN HERE
2/03/2003
00:19:19
| RE: Quick HP & Torque Q
IP: Logged
Message:
Here's another Q for ya guys. Which should i buy first: seeings how i buy things one at a time over a month to month basis.
Either the Crank Pulley - $70
the Volant Intake - $250 +
or the V8 TB - $220
I was leaning towards the crank pulley cause it's cheaper, but if the TB makes that much more difference maybe i should wait and save up for that.
Thanks again
|
Buddy Jones
Dodge Dakota
JOIN HERE
2/03/2003
14:24:47
| RE: Quick HP & Torque Q
IP: Logged
Message:
Get them in this order:
1.Crank pulley
2.V8 throttle body
3.Volant Intake
|
Texas Todd
Dodge Dakota
JOIN HERE
2/03/2003
14:28:36
| RE: Quick HP & Torque Q
IP: Logged
Message:
Couldn't you save some of that hard earned money, and make your own intake like us 4.7 guys do? Just wondering?
|
waterpolo
GenIII
2/03/2003
14:31:30
| RE: Quick HP & Torque Q
IP: Logged
Message:
Cal Dak -- what engine do you have? Reason i ask is because the 3.9 does not have 190 horeses, it only has 175 horses stock and 225 ft/lbs of torque
|
Buddy Jones
Dodge Dakota
JOIN HERE
2/03/2003
15:05:31
| RE: Quick HP & Torque Q
IP: Logged
Message:
I was just wondering the same thing.If it came with 175 hp and 225 ft/lbs torque then at the crank, since that's what you wanna know, you should have about 215 horsepower and 265 ft/lbs of torque.
|
Cal Dak
Dodge Dakota
JOIN HERE
2/03/2003
21:23:07
| RE: Quick HP & Torque Q
IP: Logged
Message:
No, i know it only has 175 HP but i thought that it only had 190 lbs. of Torque.
|
Buddy Jones
Dodge Dakota
JOIN HERE
2/03/2003
23:06:38
| RE: Quick HP & Torque Q
IP: Logged
Message:
I looked it up on the Dodge website(www.4adodge.com) and the #s are 175 horsepower and 225 ft/lbs.
|
KenDawg
Dodge Dakota
JOIN HERE
2/04/2003
19:50:35
| RE: Quick HP & Torque Q
IP: Logged
Message:
Hey Cal Dak I have a v8 TB for sell, it's the 65 MM not the 68, but if you are interested email me at Halla2@msn.com and make sure you put TB for Dakota in the subject line so it doesn't get deleted :). Name a price to, I am willing to sell it for less than 200 bucks thats for sure! Cya
|
Buddy Jones
Dodge Dakota
JOIN HERE
2/04/2003
20:33:57
| RE: Quick HP & Torque Q
IP: Logged
Message:
The 4.7l throttle bodies won't work on the 3.9 V6.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
